Allicdata Part #: | H4976KBDA-ND |
Manufacturer Part#: |
H4976KBDA |
Price: | $ 0.51 |
Product Category: | Resistors |
Manufacturer: | TE Connectivity Passive Product |
Short Description: | RES 976K OHM 1/2W 0.1% AXIAL |
More Detail: | 976 kOhms ±0.1% 0.5W, 1/2W Through Hole Resistor A... |
DataSheet: | H4976KBDA Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.46438 |
Series: | Holco, Holsworthy |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 976 kOhms |
Tolerance: | ±0.1% |
Power (Watts): | 0.5W, 1/2W |
Composition: | Metal Film |
Features: | Pulse Withstanding |
Temperature Coefficient: | ±25ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.146" Dia x 0.394" L (3.70mm x 10.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are widely used in the application field of H4976KBDA and its working principle. H4976KBDA is a form of resistive component designed for manual insertion into a circuit board to provide impedance loading. Commonly known as a through-hole resistor, this component is constructed in a standardized format that includes an electrically insulating core and two or more resistive leads. Each lead features a pre-made hole in its base which allows it to be soldered into a circuit board in the same way as all other through-hole components.
H4976KBDA\'s working principle is based on the basic fact that electrical resistance is proportional to the length of the wire. The longer the wire, the higher the resistance. As such, the H4976KBDA is designed with a spirally-formed, high-resistance resistive lead that involves the length of wire between the base and the end tip. This wire has a consistent cross-sectional area and a constant diameter that creates a linear voltage drop across its length. As an electric current flows from one end to the other, the voltage that reaches the output side will be lower than that of the input end, thereby providing the desired electrical resistance.
The H4976KBDA\'s resistive lead is usually made of a highly conductive metal such as copper or silver, and often coated with a corrosion-resistant material. It may also include a metal film layer, or some other material, which further enhances the insulation properties. Since the conductive leads of this component are relatively large, it is capable of transmitting large volumes of current. This is advantageous in situations where high current loads are required.
The H4976KBDA is also designed with an air gap between the two resistive leads. This air gap serves to moderate the heat conduction between the two leads, allowing for greater energy control and more efficient use of power. In some cases, the air gap may be filled with a dielectric material, such as a polymeric resin, which further increases the resistive value of the component. The air gap also has the advantage of protecting the component from vibration and shock.
H4976KBDA is designed to be used in various applications, such as voltage regulators, fluorescent lighting, and power supplies. It is also used in medical and aerospace equipment, where high voltage and high current loads are necessary. As such, the use of this type of resistor can reduce cost as well as improve the accuracy and efficiency of the electrical system.
By utilizing the H4976KBDA, users can benefit from high accuracy and low electrical noise performance. The component also has a high voltage rating that is safe enough for most applications. With its air gap insulation property, the H4976KBDA provides excellent protection from heat and vibration, making it an ideal choice for various throughhole resistors applications. It is also relatively easy to install and maintain.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
H497K6BDA | TE Connectiv... | 0.51 $ | 1000 | RES 97.6K OHM 1/2W 0.1% A... |
H4976KBDA | TE Connectiv... | 0.51 $ | 1000 | RES 976K OHM 1/2W 0.1% AX... |
H4976KBCA | TE Connectiv... | 0.48 $ | 1000 | RES 976K OHM 1/2W 0.1% AX... |
H497R6BDA | TE Connectiv... | 0.51 $ | 1000 | RES 97.6 OHM 1/2W 0.1% AX... |
H4976RBDA | TE Connectiv... | 0.51 $ | 1000 | RES 976 OHM 1/2W 0.1% AXI... |
H497R6BYA | TE Connectiv... | 0.57 $ | 1000 | RES 97.6 OHM 1/2W 0.1% AX... |
H4976RBYA | TE Connectiv... | 0.57 $ | 1000 | RES 976 OHM 1/2W 0.1% AXI... |
H497K6BYA | TE Connectiv... | 0.57 $ | 1000 | RES 97.6K OHM 1/2W 0.1% A... |
H4976KBYA | TE Connectiv... | 0.57 $ | 1000 | RES 976K OHM 1/2W 0.1% AX... |
H497R6BCA | TE Connectiv... | 0.48 $ | 1000 | RES 97.6 OHM 1/2W 0.1% AX... |
H4976RBCA | TE Connectiv... | 0.48 $ | 1000 | RES 976 OHM 1/2W 0.1% AXI... |
H497K6BCA | TE Connectiv... | 0.48 $ | 1000 | RES 97.6K OHM 1/2W 0.1% A... |
H497R6BZA | TE Connectiv... | 0.41 $ | 1000 | RES 97.6 OHM 1/2W 0.1% AX... |
H4976RBZA | TE Connectiv... | 0.41 $ | 1000 | RES 976 OHM 1/2W 0.1% AXI... |
H497K6BZA | TE Connectiv... | 0.41 $ | 1000 | RES 97.6K OHM 1/2W 0.1% A... |
H4976KBZA | TE Connectiv... | 0.41 $ | 1000 | RES 976K OHM 1/2W 0.1% AX... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...