H4P1K2FCA

Series:	Holco, Holsworthy
Packaging:	Bulk
Part Status:	Active
Resistance:	1.2 kOhms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Metal Film
Features:	Pulse Withstanding
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.146" Dia x 0.394" L (3.70mm x 10.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: H4P1K2FCA application field and working principle

Through Hole Resistors are one of the most common types of electrical components in electronic circuits. They are present in almost every electronic device, from consumer products to industrial equipment, providing basic resistance controls in circuits. The H4P1K2FCA (HRT, High Resistance Through Hole Resistor) is a type of resistor designed to handle high resistance applications. Its characteristics allow it to be used in many different applications.

The general working principle of Through Hole Resistor is that a resistor wraps further around the screw hole. This increases the diameter of the hole, thus increasing the resistance. The H4P1K2FCA is designed to increase the resistance of the circuit. It is also designed to be more rigid and durable than other types of resistor. This is an important feature because it allows the resistor to handle a higher resistance levels while also lasting longer.

The H4P1K2FCA application fields vary widely. This type of resistor is commonly used in electrical circuits as a voltage regulator, as a current limiter, or as a temperature controller. It may also be used in power supply circuits as an AC voltage reducer or as a voltage regulator. In audio circuits, it can be used to reduce noise, whilst in signal processing circuits it can be used as an amplifier or to limit signal strength. In addition, it can also be used in various consumer products and medical imaging equipment.

The H4P1K2FCA works by using a special coating. The coating is a polysilicon film, which directs the current to the desired direction. When the current is passing through the device, it produces resistance which is proportional to the material. By adjusting the material, the resistance level can be increased or reduced, allowing the device to function in different capacities.

The working principle of the H4P1K2FCA is based on the principle of electrostatic induction. This means that an electrical discharge in one electrode will induce a current flow in another electrode. This current flow depends on the resistance of the device and can be adjusted by varying the material. In addition, the amount of current produced by the device is also affected by the voltage applied to the device.

The H4P1K2FCA has a large number of applications, from consumer products to industrial applications. The device is relatively easy to use and is available in a variety of sizes and resistance levels. This makes it suitable for a range of applications, including voltage regulators, current limiters, audio systems, signal processing systems, and power supplies. The H4P1K2FCA is also an extremely reliable device and has an extremely low failure rate. This makes it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description