H813KBDA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are a type of electronic component in which a long lead is inserted into a bored-through hole. The lead is typically electrically connected to a resistive element between the two ends. Through-hole resistors are used in a variety of applications and can be made from a variety of materials. The H813KBDA is a through-hole resistor that is used in a number of different applications.

H813KBDA through-hole resistors are used in many electronic designs. The resistor is used in various forms of circuit protection, including over-current and over-temperature protection. The resistor is also used in the output stage of many power amplifiers, where it is used to keep the circuit from exceeding its operating voltage. In addition, H813KBDA resistors are used in the input stage of more complex circuits, such as those used in radio transmitters, where its low tolerance and low leakage current provide an ideal match for the transistor used in the circuit.

The working principle of H813KBDA through-hole resistors is based on Ohm\'s law, which states that the current through a conductor between two points is directly proportional to the voltage across it. The resistor acts as an impedance between the two points, and this impedance determines the amount of current that can flow. The amount of resistance is expressed in ohms, and the higher the ohm rating, the greater the resistance. In the case of the H813KBDA, the resistor has an ohm rating of 5K, which is equal to 5,000 ohms.

In order for H813KBDA to work properly, it should be installed in a proper manner. The resistor must be connected correctly so that it is not in contact with other components on the circuit board. If the resistor is not connected correctly, it can become damaged and can cause a grounding or short circuit issue. Additionally, the resistor must be properly insulated so that it does not short circuit with any other component.

H813KBDA through-hole resistors are a widely used component in many electronic designs. They are designed to provide circuit protection for over-current and over-temperature protection, making them ideal for input stages, power amplifiers, and other complex circuits. The resistor works on the principle of Ohm\'s Law, in which an increase in voltage across the resistor results in an increase in current. Proper installation and insulation of the resistor is necessary to ensure it functions properly.

The specific data is subject to PDF, and the above content is for reference