H8365RDYA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most fundamental components of circuit boards. The H8365RDYA is a particular type of Through Hole Resistor designed for PCBs and prototyping. It is a current limiting resistor typically used to prevent transistors and comparators from overload. It is also commonly used in medical applications such as patient monitors.

The H8365RDYA is a 4-terminal Through Hole Resistor with two leads connected to the top of the package and two connected to the bottom. It consists of a central core of metal oxide that is encased within a ceramic insulator. This resistor is designed to handle temperatures up to 150℃ and is capable of handling up to 4A of current without failure. Its small size makes it ideal for PCBs and prototyping because it does not take up much board space.

The H8365RDYA is a current limiting resistor, meaning that it controls the amount of current flowing in a circuit. This is done by restricting the voltage drop over the resistor. The amount of current that the resistor allows to flow is proportional to the applied voltage. For example, if the applied voltage is 3V, the current flowing through the H8365RDYA can be calculated using Ohm’s law, which states that current is equal to voltage divided by resistance. Thus, the current flowing through this resistor is equal to 3V/477ohms, or 6.3mA.

In addition to limiting current, the H8365RDYA can also be used to provide isolation between two different voltage sources. For example, if one source is connected directly to the H8365RDYA, and the other is connected to the opposite side, then the resistor acts as a barrier, preventing the two sources from shorting out. This can be useful in circuits where it’s important to keep devices from overheating, as it prevents a high-voltage source from damaging a lower voltage device.

The H8365RDYA is also frequently used in medical applications. This is due to its resistance to electromagnetic interference, which makes it ideal for patient monitors and other medical devices. Patients are often fitted with sensors that measure vital signs such as heart rate and respiration. The H8365RDYA is used in these applications to provide isolation between the sensor and the monitor, ensuring that the monitor does not receive interference from other devices in the area. The H8365RDYA also has a low drift rate, meaning that it doesn’t change its resistance too much over time, thus providing reliable results.

The H8365RDYA is an invaluable component in a wide range of applications. From medical devices to PCBs, this Through Hole Resistor provides reliable current limiting, isolation, and stability. With its small size and ability to handle high temperatures and current, the H8365RDYA is sure to be a mainstay in the world of circuit boards for years to come.

The specific data is subject to PDF, and the above content is for reference