H846R4BZA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of resistor that falls into the broad category of passive electrical circuits. Resistors have a variety of uses, such as in circuits to regulate the voltage in order to provide a steady, safe electronic current. One type of through hole resistor is the H846R4BZA, which has specific applications and a mode of operation that sets it apart from other resistive components. In order to understand the uses and operation of this resistor, it is important to look at how it is designed and works.

The H846R4BZA consists of a thin, circular housing that has two metal strips connecting the sides. Tabs on the sides of the body are drilled and tapped to create the electrical connection for the resistor. The outer diameter of the resistive element varies depending on the size of the unit but is usually approximately 4mm. The inside of the housing contains a pair of contacts, which form a resistive element. This element works as a resistor by providing a steady current when an alternating voltage is applied.

The H846R4BZA is used in a number of applications due to its compact size and cost-effectiveness. The resistor is typically used in automotive and marine systems to regulate current and voltage levels. It is also used to control the level of power in equipment such as amplifiers, motors, and pumps. In addition, they are often used as safety devices, as they limit the amount of current flowing into a device.

The working principle of the H846R4BZA is relatively simple. When a voltage is applied to the resistive element, the contacts inside the housing form a resistance. This resistance is then used to reduce the amount of current flowing through the circuit, thus regulating the flow of power. These resistors are typically designed with a resistor value range, which defines the amount of current that can flow through the circuit. This range can be adjusted by changing the contact spacing inside the H846R4BZA.

In summary, the H846R4BZA is a type of through-hole resistor that is used in a variety of applications. It is designed with a pair of contacts inside the housing that form a resistive element to regulate the amount of current flowing through the circuit. This allows it to be used in automotive and marine systems, as well as in safety devices and power control equipment. The resistor can be easily adjusted by changing the contact spacing in order to provide the desired amount of resistance.

The specific data is subject to PDF, and the above content is for reference