H8475RBZA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

The H8475RBZA is a through-hole resistor, a passive two-terminal device used in electronic circuits to limit current and provide a particular resistance value. Through-hole resistors are physically larger than surface-mount resistors, often providing both higher power handling and better noise immunity. These resistors are well suited for prototyping and circuit assembly when the limited board space provided by surface mounting is not available.

The process of building a circuit with a through-hole resistor begins with mounting the component in the desired layout on the printed circuit board (PCB). In most cases, the blank copper board is drilled with holes that match the leads of the resistor, and the component is inserted into these holes with the leads protruding through the other side. Once the component is in place it can be soldered to the circuit board or mounted in place using high temperature tape. The resistor itself is usually encased in a heat-resistant plastic casing that helps to protect the wiring and components within.

Once the component is secured to the board, the other end of the resistor is typically connected to a wire or another component. This connection is often made using crimp connectors or screw terminals. When connected, the resistor acts to limit the current flowing through the circuit, resulting in the desired electrical resistance. Depending on the application, the resistance provided by the resistor can be varied by increasing or decreasing the length of the leads, making the component not only durable but also adjustable.

Through-hole resistors are typically used in applications where high power handling, durability and noise immunity are important. Common uses include electronic power supplies, motor power supplies, and precision current and voltage sensing circuits. In addition to providing these benefits, through-hole resistors are also relatively easy to work with, making them an ideal choice for engineers who require rapid prototyping and circuit assembly.

The H8475RBZA is a particularly versatile through-hole resistor, with a wide range of resistance values (from 100 ohms to 1 megohm) and a maximum power rating of 25 watts. It is designed for use in a variety of high-power and precision applications, including inverters, switching power supplies, solar inverters, and motor control circuits. Its tolerance of 1%, low noise and heat resistance allow it to perform reliably and consistently even under the most extreme conditions.

The specific data is subject to PDF, and the above content is for reference