H8510RFDA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors provide an important role in the operation of circuits. Through hole resistors are available in a variety of sizes and resistances, ranging from tiny 0603 packages all the way up to large TO-220 packages. The most common type of through hole resistor is the axial leaded type, where the leads are connected to the two ends of the resistor. Axial resistors are also widely used because of their size and versatility.

However, for more specialized applications, resistors with a higher power rating or custom resistance values can be found in H8510RFDA packages. An H8510RFDA package is a through hole product with an adjustable resistance, usually 10 to 50 K ohms. These resistors are designed for special applications such as radio frequency identification (RFID) and precision resistor measurement, where accuracy is of the utmost importance.

The H8510RFDA consists of two adjustable resistors inside a single case. One resistor is the actual resistance, the other is an additional resistor which is used to trim the resistance value to the desired amount. The package also features two leads, one of which is attached to the main resistor while the second is connected to a trimming potentiometer.

The H8510RFDA is typically used in RFID and other electronic measurement applications, where it can measure resistance to a higher degree of accuracy. When the trimming potentiometer is adjusted appropriately, the resistor\'s resistance is changed until the desired value is met. This allows for precision resistive measurement that would otherwise not be possible with standard resistors.

The H8510RFDA is also used in medical devices, semiconductor testing equipment, and other applications where high accuracy is needed. Its adjustable resistance also makes it beneficial for use in voltage regulators, current-limiting circuits, and other power management applications.

The working principle of the H8510RFDA is simple. When a current flows through the main resistor, a voltage drop across it occurs. This voltage drop is proportional to the current flowing through it. By adjusting the trimming potentiometer, the resistance of the main resistor can be adjusted and the resulting voltage drop modified accordingly.

By employing the H8510RFDA package, circuit designers can precisely adjust resistances to meet their exact application needs. This makes it far more applicable than other through hole resistors. And with its very high accuracy and wide resistance range, the H8510RFDA provides a versatile and reliable solution for various circuit design requirements.

The specific data is subject to PDF, and the above content is for reference