H86K49DZA

Through hole resistors are common and versatile components used in many electronic applications. The H86K49DZA is a type of through hole resistor, known as a surface mounted, low value resistor. It is primarily used for low voltage applications where a small size and reduced cost is desired over higher wattages or bulkier traditional through hole resistors.

The H86K49DZA is a small surface mount form factor. It measures only 2.0mm x 1.25mm and has a very low profile. Due to its size, the H86K49DZA can fit into small spaces and densely populated circuit boards, wherever space is limited. It is designed to provide reliable performance with low power consumption, making it suitable for many applications such as amplifiers, switching regulators, and voltage references.

The surface mount design of the H86K49DZA allows robust installation. It makes use of nickel-based metallized polycarbonate substrate technology for contact reinforcement and increased strength. This makes the H86K49DZA resistant to processing temperatures up to +150°C. It is also able to withstand short term temperature excursions up to +225°C.

The H86K49DZA is a zero-Ohm jumber resistor. It has a resistance value of 0-Ohms, meaning no electrical resistance. This allows it to act as an electrical connection between two points on a circuit board. This is useful where connections need to be very tightly packed, or where a connection needs to be disabled.

The H86K49DZA also features a high current rating of 5 Amps. This allows it to be used in a wide variety of applications where current needs to flow without interruption. They are commonly used as a jumper wire, as an antenna switcher, or for signal routing. It is widely used in automotive applications, cellular phones, and PC boards.

The H86K49DZA is typically made from nickel-plated copper. It is lead-free, making it environmentally friendly and RoHS compliant. It has a maximum operating temperature of +150°C, as well as a surge rating of +225°C.

The H86K49DZA is a reliable and economical through-hole resistor option. It is light in weight yet strong enough to withstand the mechanical and thermal stresses of assembly through hole technology. It is capable of delivering low voltage and low power operation. For these reasons, the H86K49DZA is a viable option for use in a wide range of applications.