H86K8FDA

Series:	Holco, Holsworthy
Packaging:	Bulk
Part Status:	Active
Resistance:	6.8 kOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Pulse Withstanding
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.098" Dia x 0.283" L (2.50mm x 7.20mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

H86K8FDA Through Hole Resistors are one of the most commonly used components in electrical and electronic devices. They are used to control the flow of current in a circuit and help protect other components from damage by overvoltage. The H86K8FDA Through Hole Resistors has a rated power rating of 30 W and it is available in a range of resistance values from 10 ohms to 100K ohms. The H86K8FDA Through Hole Resistors are typically used for electronic equipment with high-power requirements.The H86K8FDA Through Hole Resistors is a resistor with a metal-oxide-semiconductor layer on one side which acts as a resistive element. This semiconductor layer is usually composed of silicon and is thin enough to allow electrons to flow from one side to another. The semiconductor layer is also often referred to as the "body" and the contact area is known as the "eye". The edges of the resistive elements can be rounded or flat depending on the design.The H86K8FDA Through Hole Resistors is used mainly in applications where high power dissipation and/or high current requirements are important. Typical applications of the resistor include power supplies, DC motor control, automotive electronics, audio amplifiers and circuit protection. The high power dissipation capabilities of the H86K8FDA Through Hole Resistors make them ideal for use in motor control applications as well as high current limiting applications.The work principle of the H86K8FDA Through Hole Resistors is quite simple. The resistance of the resistor is determined by the voltage applied across it. When a voltage is applied to the resistor, electrons flow from one side of the resistor to the other. The current that flows through the resistor is determined by the voltage applied and the resistance of the resistors. As the voltage increases the current also increases and the resistance decreases.The H86K8FDA Through Hole Resistors can be mounted in various positions depending on the design of the circuit. The resistors can be mounted on circuit board, through holes, or can be soldered directly to the circuit board. The resistor can also be soldered directly to other components such as transistors or capacitors. The resistors can also be mounted in a vertical or horizontal position depending on the desired results.The H86K8FDA Through Hole Resistors is an important component in many electronic applications and provides a reliable way to regulate current flow in a circuit. It is an economical and reliable way to protect other components from overvoltage damage. It is also extremely versatile and can be used in manual or automatic applications. The H86K8FDA Through Hole Resistors is available in various resistance values and is highly rated for its power capacity and low profile.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description