Allicdata Part #: | H88K45BCA-ND |
Manufacturer Part#: |
H88K45BCA |
Price: | $ 0.35 |
Product Category: | Resistors |
Manufacturer: | TE Connectivity Passive Product |
Short Description: | RES 8.45K OHM 1/4W 0.1% AXIAL |
More Detail: | 8.45 kOhms ±0.1% 0.25W, 1/4W Through Hole Resistor... |
DataSheet: | H88K45BCA Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.31513 |
Series: | Holco, Holsworthy |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 8.45 kOhms |
Tolerance: | ±0.1% |
Power (Watts): | 0.25W, 1/4W |
Composition: | Metal Film |
Features: | Pulse Withstanding |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.098" Dia x 0.283" L (2.50mm x 7.20mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A through hole resistor, or H88K45BCA, is an electrical component used in many electronic systems. It usually consists of a ceramic body and two metal contacts on either end. The resistor acts as a resistance to the flow of electrical current. Resistance is measured in Ohms and is typically marked on the resistor itself. The main purpose of the resistor is to reduce the amount of current that passes through the circuit, thus protecting other components.
The construction of the H88K45BCA is quite simple. The ceramic body is called a substrate and two metal contacts are attached to it. One of the contacts is called the anode and the other is called the cathode. A layer of insulation material separates the anode and the cathode from each other. A low-value resistor is usually connected between the anode and the cathode to form a complete circuit.
The application of the H88K45BCA depends on its resistance value. It can be used as a current-limiting resistor, a voltage-divider resistor, or a bypass resistor. A current-limiting resistor is used to protect other components from high current flows. It limits the maximum current passing through the circuit. A voltage-divider resistor is used to divide the voltage between two points in a circuit. A bypass resistor provides a path for AC currents to bypass other components in the circuit. It is usually used in filter circuits.
The working principle of a through hole resistor is straightforward. It works by converting some of the electrical energy passing through it into heat energy. The amount of the energy converted into heat depends on the resistance value of the resistor. As the electrical current passes through it, the electrical energy is dissipated as heat which is then dissipated into the surrounding environment.
Through hole resistors are used in a variety of applications, from consumer electronics to industrial control systems. They are highly reliable and durable and are available in a wide range of resistance values. They are also relatively inexpensive and easy to use. For these reasons, they are often the preferred choice for certain electronic applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
H88K06BCA | TE Connectiv... | 0.35 $ | 1000 | RES 8.06K OHM 1/4W 0.1% A... |
H88K25BCA | TE Connectiv... | 0.35 $ | 1000 | RES 8.25K OHM 1/4W 0.1% A... |
H88K45BCA | TE Connectiv... | 0.35 $ | 1000 | RES 8.45K OHM 1/4W 0.1% A... |
H88K66BCA | TE Connectiv... | 0.35 $ | 1000 | RES 8.66K OHM 1/4W 0.1% A... |
H88K87BCA | TE Connectiv... | 0.35 $ | 1000 | RES 8.87K OHM 1/4W 0.1% A... |
H88K25DYA | TE Connectiv... | 0.36 $ | 1000 | RES 8.25K OHM 1/4W 0.5% A... |
H88K66DYA | TE Connectiv... | 0.36 $ | 1000 | RES 8.66K OHM 1/4W 0.5% A... |
H88K0BDA | TE Connectiv... | 0.39 $ | 1000 | RES 8.00K OHM 1/4W 0.1% A... |
H88K06BZA | TE Connectiv... | 0.31 $ | 1000 | RES 8.06K OHM 1/4W 0.1% A... |
H88K25BZA | TE Connectiv... | 0.31 $ | 1000 | RES 8.25K OHM 1/4W 0.1% A... |
H88K45BZA | TE Connectiv... | 0.31 $ | 1000 | RES 8.45K OHM 1/4W 0.1% A... |
H88K66BZA | TE Connectiv... | 0.31 $ | 1000 | RES 8.66K OHM 1/4W 0.1% A... |
H88K87BZA | TE Connectiv... | 0.31 $ | 1000 | RES 8.87K OHM 1/4W 0.1% A... |
H88K06BDA | TE Connectiv... | 0.39 $ | 1000 | RES 8.06K OHM 1/4W 0.1% A... |
H88K25BDA | TE Connectiv... | 0.39 $ | 1000 | RES 8.25K OHM 1/4W 0.1% A... |
H88K45BDA | TE Connectiv... | 0.39 $ | 1000 | RES 8.45K OHM 1/4W 0.1% A... |
H88K66BDA | TE Connectiv... | 0.39 $ | 1000 | RES 8.66K OHM 1/4W 0.1% A... |
H88K87BDA | TE Connectiv... | 0.39 $ | 1000 | RES 8.87K OHM 1/4W 0.1% A... |
H88K06BYA | TE Connectiv... | 0.4 $ | 1000 | RES 8.06K OHM 1/4W 0.1% A... |
H88K25BYA | TE Connectiv... | 0.4 $ | 1000 | RES 8.25K OHM 1/4W 0.1% A... |
H88K45BYA | TE Connectiv... | 0.4 $ | 1000 | RES 8.45K OHM 1/4W 0.1% A... |
H88K66BYA | TE Connectiv... | 0.4 $ | 1000 | RES 8.66K OHM 1/4W 0.1% A... |
H88K87BYA | TE Connectiv... | 0.4 $ | 1000 | RES 8.87K OHM 1/4W 0.1% A... |
H88K2FZA | TE Connectiv... | 0.2 $ | 1000 | RES 8.20K OHM 1/4W 1% AXI... |
H88K25DCA | TE Connectiv... | 0.26 $ | 1000 | RES 8.25K OHM 1/4W 0.5% A... |
H88K66DCA | TE Connectiv... | 0.26 $ | 1000 | RES 8.66K OHM 1/4W 0.5% A... |
H88K2FYA | TE Connectiv... | 0.27 $ | 1000 | RES 8.20K OHM 1/4W 1% AXI... |
H88K25DZA | TE Connectiv... | 0.24 $ | 1000 | RES 8.25K OHM 1/4W 0.5% A... |
H88K66DZA | TE Connectiv... | 0.24 $ | 1000 | RES 8.66K OHM 1/4W 0.5% A... |
H88K66FDA | TE Connectiv... | 0.25 $ | 1000 | RES 8.66K OHM 1/4W 1% AXI... |
H88K2FDA | TE Connectiv... | 0.25 $ | 1000 | RES 8.20K OHM 1/4W 1% AXI... |
H88K2FCA | TE Connectiv... | 0.23 $ | 1000 | RES 8.20K OHM 1/4W 1% AXI... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...