H8910KFDA Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors can be used for a variety of applications, and the H8910KFDA is one of them. The H8910KFDA is a three-terminal electrolytic chip resistor, designed to be soldered directly to a printed circuit board (PCB). These resistors can be used in several applications, as long as the parameters they provide are sufficient. One of the applications the H8910KFDA provides is a resistor network for canceling stray capacitance.

The H8910KFDA resistor has a three-terminal differential input configuration. This allows for cancellation of any stray capacitance. By connecting the three terminals of the H8910KFDA in a differential configuration, the stray capacitance can be canceled out. The capacitance can range from 25pF to 2500pF. This enables the H8910KFDA to be used in a variety of applications where stray capacitance from an interfering signal is shortening the signal propagation time, thus causing distortion and interference.

The H8910KFDA resistors are designed to have a very low DC resistance value. This ensures that the total resistance in the differential configuration is reduced to a minimum. This low resistance allows the H8910KFDA to be used in applications where the signal propagation time needs to be as low as possible. By reducing the total resistance, the speed of signal propagation is increased, thus reducing distortion.

The H8910KFDA is also designed to dissipate a high amount of power. This makes the resistor suitable for applications where the signal is high voltage. The high power dissipation allows the resistor to dissipate the heat generated by the high voltage signals, thus preventing any damage to the components of the circuit. A high voltage signal can often cause other resistors to overheat and fail, but the H8910KFDA is designed to withstand such high power signals.

The H8910KFDA has a wide range of parameters, which makes it suitable for many applications. The maximum power dissipation is 2W and it can operate at temperatures ranging from -55°C to +150°C with a maximum voltage of 250V. The H8910KFDA also has a very high insulation resistance and a very low inductance, making it suitable for attenuating high-frequency signals.

In short, the H8910KFDA three-terminal resistor network is designed to provide excellent performance in applications where there is a high level of stray capacitance or very low signal propagation time is required. The resistor can be used in applications from 25pF to 2500pF in capacitance, has a wide range of parameters and a high power dissipation. The H8910KFDA is a great choice for cancelation of stray capacitance in a variety of applications and is an excellent choice for Through Hole Resistors.

The specific data is subject to PDF, and the above content is for reference