HA1-4902-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear comparators are electronic devices used to compare two analog signals and generate an output based on the magnitude of the two signals. The HA1-4902-2 is a linear comparator which offers a wide range of applications and low-power operation.

The HA1-4902-2 is designed to compare two input signals, with one of the signals scaled before coming into the comparator. The scaling factor reduces the need for matching the two input signals’ amplitudes, thereby offering a more flexible input range. The comparator also has an adjustable hysteresis voltage, where a lower hysteresis voltage results in a more sensitive output.

The HA1-4902-2 is commonly used for temperature sensing, where the comparison of the sensor voltage to a reference voltage produces a trigger when temperature crosses a certain threshold. Other applications include battery threshold detection, frequency to voltage conversion, analog switch debouncing and over-speed detection. It is also used in audio applications such as a crossover equalizer and an automatic level control circuit.

The HA1-4902-2 looks similar to a 555 timer, with a variable resistor in the place of the timing resistor. However, whereas the 555 timer produces a pulse of variable length, the HA1-4902-2 produces a voltage output which can be either HIGH or LOW depending on the input.

The HA1-4902-2 requires a single-supply voltage to power its operation. This voltage can vary from 3V to 14V and is typically set close to the peak-to-peak value of the input signal, allowing the device to operate over a wide input range. The device contains two op-amps that are connected in an up-down comparator configuration. This allows the device to compare the input signal to both a reference voltage and an adjustable hysteresis voltage.

The output of the HA1-4902-2 is a binary signal, with a HIGH output when the input signal is greater than both the reference voltage and the hysteresis voltage, and a LOW output when the input signal is lower than both the reference voltage and the hysteresis voltage. When the input signal is between the two voltage levels, the output will remain held in its last logic state.

The HA1-4902-2 is designed for low-power operations and can operate over a wide temperature range. It is also designed for rugged operations, making it a reliable choice for a variety of applications. The device also features an adjustable hysteresis voltage, allowing users to fine-tune the comparator’s performance to their specific application requirements.

The specific data is subject to PDF, and the above content is for reference