| Allicdata Part #: | HA1-5104-2-ND |
| Manufacturer Part#: |
HA1-5104-2 |
| Price: | $ 19.99 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | Intersil |
| Short Description: | IC OPAMP GP 8MHZ 14CDIP |
| More Detail: | General Purpose Amplifier 4 Circuit 14-CERDIP |
| DataSheet: |  HA1-5104-2 Datasheet/PDF |
| Quantity: | 1000 |
| 450 +: | $ 18.16950 |
| Voltage - Input Offset: | 500µV |
| Base Part Number: | HA-5104 |
| Supplier Device Package: | 14-CERDIP |
| Package / Case: | 14-CDIP (0.300", 7.62mm) |
| Mounting Type: | Through Hole |
| Operating Temperature: | -55°C ~ 125°C |
| Voltage - Supply, Single/Dual (±): | ±5 V ~ 18 V |
| Current - Output / Channel: | 15mA |
| Current - Supply: | 5mA |
| Series: | -- |
| Current - Input Bias: | 130nA |
| -3db Bandwidth: | 8MHz |
| Slew Rate: | 3 V/µs |
| Output Type: | -- |
| Number of Circuits: | 4 |
| Amplifier Type: | General Purpose |
| Part Status: | Active |
| Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The HA1-5104-2 is an instrumentation amplifier from Honeywell and is used in a variety of applications. It is a linear type of amplifier, which can be used for amplifying an input signal or for providing an attenuated output. This amplifier is most often used for precision measurements, such as in medical, industrial, and automotive applications.
The HA1-5104-2 uses an operational amplifier (op amp) for its power gain, a wideband amplifier buffer for the input, and a differential amplifier for its output stage. The input is amplified by the op amp, which has a gain of up to 1000x. The wideband buffer amplifier prevents any DC offset in the signal and ensures that the signal reaches the output stage in an amplified state. Lastly, the differential amplifier provides the desired gain and output level.
The HA1-5104-2 can be used to amplify a signal, such as a microphone input, or it can be used to provide an attenuated output. When used in the latter configuration, the signal is amplified in the op amp stage and then attenuated in the differential amplifier stage. This allows for precise levels of attenuation, which may be necessary for certain applications.
In addition to its use as a signal amplifier, the HA1-5104-2 can also be used in medical, industrial, and automotive applications. In medical applications, the amplifier can be used to amplify pulses from electrocardiograms (ECGs) or other medical instruments. In industrial applications, the amplifier can be used to monitor and measure the pressure of liquids or gases. Finally, in automotive applications, the amplifier can be used to monitor engine performance or fuel consumption.
Overall, the HA1-5104-2 is a versatile instrumentation amplifier designed for a wide range of applications. It uses an operational amplifier for its power gain, a buffer amplifier for its input, and a differential amplifier for its output stage. This amplifier can be used to amplify a signal or to provide an attenuated output, making it well suited for various medical, industrial, and automotive applications.
The specific data is subject to PDF, and the above content is for reference
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...