Allicdata Part #: | HA7-5147R5254-ND |
Manufacturer Part#: |
HA7-5147R5254 |
Price: | $ 21.57 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Intersil |
Short Description: | IC OPAMP GP 140MHZ 8CDIP |
More Detail: | General Purpose Amplifier 1 Circuit 8-CERDIP |
DataSheet: | HA7-5147R5254 Datasheet/PDF |
Quantity: | 1000 |
384 +: | $ 19.60690 |
Voltage - Input Offset: | 30µV |
Base Part Number: | HA-5147 |
Supplier Device Package: | 8-CERDIP |
Package / Case: | 8-CDIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -55°C ~ 125°C |
Voltage - Supply, Single/Dual (±): | 10 V ~ 40 V, ±5 V ~ 20 V |
Current - Output / Channel: | 25mA |
Current - Supply: | 3.5mA |
Series: | -- |
Current - Input Bias: | 15nA |
Gain Bandwidth Product: | 140MHz |
Slew Rate: | 35 V/µs |
Output Type: | -- |
Number of Circuits: | 1 |
Amplifier Type: | General Purpose |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The HA7-5147R5254 is an instrumentation linear amplifier, operational amplifier (op amp) and buffer amplifier. It is a multi-purpose, precision instrumentation amplifier that provides extremely low noise and good gain accuracy, as well as good common mode rejection. Its single-ended, low-cost design makes it ideal for a variety of applications, including test and measurement, medical, military and aerospace.
The amplifier’s main purpose is to provide precise signal amplification while keeping the output accurate and noise-free. It is designed to provide amplification from low-level input signals, with an effective transimpedance gain (current to voltage) of up to 5 kHz, and a low-pass filter cutoff frequency of up to 3 kHz. This allows the amplifier to be used for applications that require precise control of input signals, such as medical and scientific instrumentation, surveillance and security systems, and audio and video systems.
The HA7-5147R5254 requires only a single power supply and utilizes a single transistor amplifier circuit with a differential input to amplify input signals. This allows the amplifier to produce output voltage levels that are directly proportional to input current. Its single-ended and low-cost design make it ideal for applications that require excellent gain accuracy, low noise and high common mode rejection.
The HA7-5147R5254 can also be used as an operational amplifier, buffer amplifier or voltage follower. As an op amp, it can be used to amplify an input signal and provide gain, offset, and inversion control. As a buffer, it can be used to provide isolation from the load, and as a voltage follower it can provide isolated output voltage that is equal to the input voltage. This makes the HA7-5147R5254 an ideal instrumentation amplifier for DC voltage to voltage measurements and precision DC or AC measurements.
The working principle of the HA7-5147R5254 is based on the use of the amplifier’s dynamic feedback. The amplifier’s input and output terminals are connected through an RF network that is tuned to a certain frequency to provide the desired gain. The amplifier’s output is then fed back to the input in order to reduce the amount of noise in the output signal. This feedback information is then used to compensate for drift and distortion that could occur due to changes in temperature and input signals.
The HA7-5147R5254 is a versatile instrumentation amplifier that is designed to provide precision amplification and gain accuracy, low-noise, good common mode rejection and temperature stability. Its single-ended, low-cost design make it ideal for a variety of applications. Additionally, its ability to provide gain, offset and inversion control as an operational amplifier, buffer amplifier and voltage follower make it a valuable tool for precision DC or AC measurements.
The specific data is subject to PDF, and the above content is for reference
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...