HAC 200-S

Frequency:	DC ~ 50kHz
Package / Case:	Module
Mounting Type:	Chassis Mount
Polarization:	Bidirectional
Operating Temperature:	-10°C ~ 80°C
Current - Supply (Max):	18mA
Response Time:	7µs
Voltage - Supply:	±15V
Accuracy:	±1%
Linearity:	±1%
Series:	HAC
Sensitivity:	--
Output:	Ratiometric, Voltage
Number of Channels:	1
Current - Sensing:	200A
Sensor Type:	Hall Effect, Open Loop
For Measuring:	AC/DC
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to HAC 200-s Current Transducers

The HAC 200-s is a current transducer designed to measure the current of single and three-phase AC power systems. It is one of many different types of transducers used in power system applications. A transducer is essentially a device that converts one type of energy into another. In the case of the HAC 200-s, it converts electrical current into a signal that is proportional to the current.

Application Fields

The HAC 200-s current transducer can be used in many different applications. It can be used for monitoring the quality of AC power such as frequency, phase sequence, and other parameters. It can also be used for power quality monitoring, power factor correction, harmonic analysis, and power distribution. In addition, applications such as motor control, energy management, and voltage control can also benefit from the use of the HAC 200-s current transducer.

Working Principle

The HAC 200-s is based on the principles of electrical impedance. It consists of a sensing core with two layers of ferrite core wrapped around it. The sensing core is wound with a wire that acts as a primary winding. A secondary winding is also wrapped around the ferrite core to create a transformer. When current flows through the primary winding, it induces a voltage in the secondary winding proportional to the current. The voltage is then amplified and transmitted to a measuring instrument for analysis.

Advantages

The HAC 200-s current transducer is a reliable and durable device that offers many advantages. It is easy to install and requires no calibration or maintenance. It has a wide frequency range, low power consumption, and is capable of providing accurate measurements over long distances.The HAC 200-s can also be used for dynamic measurements in applications that require high speed measurements. This makes it ideal for use in motor control, power distribution systems, and energy management systems.

Conclusion

The HAC 200-s current transducer is a reliable and durable device used to measure the current of single and three-phase AC power systems. It consists of a sensing core wound with a wire as a primary winding and a secondary winding around the ferrite core to create a transformer. The voltage induced in the secondary winding is amplified and transmitted to a measuring instrument for analysis. The HAC 200-s offers many advantages such as ease of installation, low power consumption, and accurate measurements over long distances. It is ideal for use in motor control, power quality monitoring, power factor correction, harmonic analysis, power distribution, voltage control, and many other applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description