HB15-1.5-AG

Power (Watts):	23W
Approvals:	--
Minimum Load Required:	--
Size / Dimension:	4.87" L x 4.00" W x 2.10" H (123.7mm x 101.6mm x 53.3mm)
Mounting Type:	Chassis Mount
Features:	Adjustable Output, Remote Sense
Operating Temperature:	0°C ~ 50°C
Efficiency:	55%
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Series:	Linear B
Current - Output (Max):	1.5A
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	15V
Voltage - Input:	100, 120, 220, 230, 240 VAC
Number of Outputs:	1
Type:	Linear
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC Converters are becoming increasingly important in the modern world. They are used to convert AC power to DC power and vice versa.The HB15-1.5-AG is one such AC DC Converter. It can be used in a variety of applications, ranging from computers and consumer electronics to industrial processes and manufacturing equipment.The HB15-1.5-AG has a rated output voltage of 120V or 240V AC, and a rated short-circuit current of 1.5A. This type of converter is equipped with an EMI filter and a PFC circuit to reduce electrical noise.The working principle of the HB15-1.5-AG is based on the principle of a surge-limiting circuit. It uses an electronic controller to switch two transistors on and off to regulate the output voltage and current.The switching frequency used by the HB15-1.5-AG is fixed by its internal oscillator. This is independent of the input frequency, so the converter is not affected by variations in the input power frequency.The primary components of the HB15-1.5-AG are a rectifier bridge, an inrush current limiter, a transformer, a PFC circuit, a surge-limiting circuit, a protection circuit, and an EMI filter.The rectifier bridge is used to convert the AC power into a DC current. It rectifies the input voltage so that only the positive half-cycles are passed to the transformer.The inrush current limiter is used to limit the start-up current surge of the converter when it is first turned on. It increases the start-up time of the converter, thus reducing its power consumption.The transformer is used to step up or step down the DC voltage, depending on the output voltage required. The primary winding is connected to the rectifier bridge, and the secondary winding is connected to the output terminals.The PFC circuit is used to reduce the harmonic distortion of the input current and to decrease the peak input current. It also reduces the average power consumption of the converter.The surge-limiting circuit is used to prevent any output voltage overshoot when the converter is turned on, and to protect it from any short-circuit or over-voltage conditions.The protection circuit is used to protect the converter from any abnormal or dangerous conditions. It will shut down the converter when any of these conditions occur, thus protecting the device and connected equipment from damage.The EMI filter is used to reduce the electrical noise that is generated by the converter. This is a necessary precaution as electrical noise can interfere with other equipment in the same vicinity.In summary, the HB15-1.5-AG is an AC DC Converter that is capable of supplying up to 1.5A of current at either 120V or 240V AC. It uses a surge-limiting circuit, an EMI filter, and other components to ensure that the output voltage is regulated and the converter is protected from any harmful conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description