HC1-DC24V-D-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HC1-DC24V-D-F is a power relay that is used to switch higher voltages and currents. It can be used in residential, commercial, and industrial applications. The device is rated for a maximum current of 2 amps.

Overview of HC1-DC24V-D-F Characteristics

The HC1-DC24V-D-F is a two pole, single throw relay that can be used to switch DC and higher AC voltages. The contact arrangement includes a movable contact and two stationary contacts. The contact spacing is 1.2 mm. The contact rating is 2 A and 24 Volts DC or at least 5 Amps and 220–240 Volts AC. The device dimensions are 20.4 x 22.5 x 20.5 mm and the coil voltage is 24 Volts DC.

Applications of HC1-DC24V-D-F

The HC1-DC24V-D-F is a versatile device that can be used for a variety of applications. Some of these applications are listed below:

• Limit switches, alarams and sensors
• Control and switching of lights, fans and other electrical appliances
• Switching circuits with high current / voltage ratings
• Heat and temperature control applications
• High power ground fault interruption
• High current isolation

Working Principle of HC1-DC24V-D-F

The HC1-DC24V-D-F is a normally open contact type relay, meaning that when the coil is not energized, the lever arm of the device is pulled away from the contacts and thus, the contacts are open. When the coil is energized, the lever arm is united with the stationary contact and thereby closing them. This process is repeated as long as the coil is energized.

The HC1-DC24V-D-F power relay has an operating temperature range of -40C to +85 C. The device has a mechanical life of 10,000 cycles and an electrical life of 1,000,000 cycles. It also has a maximum surge voltage of 4,000 V and a maximum shock resistance of 10 G. The device is also UL and CSA approved.

Conclusion

The HC1-DC24V-D-F is a two pole, single throw power relay that is rated for a maximum current of 2 amps and can be used to switch DC and higher AC voltages. It is a versatile device and can be used for a variety of applications such as light and fan control, temperature control, and high power ground fault interruption and isolation. The device operates on the principle of a moving contact and two stationary contacts that are closed when the coil is energized. The device is UL and CSA approved and has a mechanical life of 10,000 cycles and an electrical life of 1,000,000 cycles.

The specific data is subject to PDF, and the above content is for reference