HC3-HTM-DC110V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays over 2 amps are typically used in applications that require a higher power rating because of their strong and durable construction. They are designed to handle repetitive switching operations, and the contacts of the relay are specially designed to protect the circuit from overcurrent and arcing. For high power applications, the HC3-HTM-DC110V (hereafter referred to as the relay) is an excellent choice.

The relay is a heavy-duty, panel-mountable power relay with an adjustable magnetic latching mechanism that can handle up to 110 Volts and an operating current of up to 2 Amps. It has three sets of contacts for switching, two normally open (NO) contacts and one normally closed (NC) contact. The relay is designed with a time delay feature to prevent it from switching while under load. The time delay can be adjusted from 0 - 5 seconds.

The relay is rated for applications up to 110 Volts and up to 2 Amps. It has a minimum operating voltage of 6 volts and a maximum clearance distance between any two contact terminals of 0.32mm. The minimum contact spark distance is 9mm. The relay also has an adjustable pull-in voltage that can be set from 21 - 110 Volts.

The relay’s working principle is based on a magnetic latching mechanism. When power is applied, an electromagnet engages, closing the two normally open contacts. This energizes a coil, which causes the armature to be pulled up against the electromagnetic force. When the power is removed, the force of the coil’s pull-in voltage is no longer sufficient to overcome the magnetic force, and the armature is released again, de-energizing the coil and opening the normally open contacts. This same cycle is repeated each time the power is applied and removed.

The relay makes an excellent choice for light industrial and commercial applications where a higher power rating is required. It is designed to perform reliably in high temperature environments, and is rated to remain stable in temperatures up to 75°C. It has been tested to withstand shock, vibration, and other environmental conditions.

The HC3-HTM-DC110V is a heavy-duty power relay rated for up to 110 Volts and up to 2 Amps. It is designed for use in light industrial and commercial applications, and is designed to withstand shock, vibration, and various environmental conditions. The working principle of the relay is based on a magnetic latching mechanism, with an adjustable time delay feature that can be set from 0 to 5 seconds and an adjustable pull-in voltage that can be set from 21 - 110 Volts. Its construction is rugged and durable, making it an excellent choice for applications that require a higher power rating.

The specific data is subject to PDF, and the above content is for reference