HC4ED-H-AC6V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal relays are electric components used to switch a circuit in response to an electrical signal either on or off. These relays are available in a variety of form factors and current ratings, with the HC4ED-H-AC6V having up to 2 amps of current capacity. This article will discuss the application field and work principles of the HC4ED-H-AC6V.

The HC4ED-H-AC6V has an integrated AC contactor, most commonly used in the control of 3, 5, or 7 kW motors. It can be used in many applications such as HVAC, pumps, fans, and compressors. Common applications for this type of relay include controlling speed, direction, and temperature. It is also commonly used to control other electromechanical devices, such as power supplies, actuators, and switch sequences.

The HC4ED-H-AC6V utilizes a twin-coil contactor design which features two control coils – one for the low (or no) current load and one for the high current load. The low current control coil is typically connected to a controller or switch, and will provide control to the contactor when activated. The high current control coil is typically connected directly to the power source, and will provide power to the contactor when activated.

The HC4ED-H-AC6V has two primary components: the contactor and the relay coil. The contactor consists of two main components – an anchor and a contact. The anchor is a steel disk that is attached to the moving part of the contactor – the contact – which is then connected to the power source. When the contact is triggered, it will move the anchor, which will cause the contact to open and close to break or make the circuit. The relay coil is connected to the contactor and is typically powered by a signal or voltage, depending on the application.

The HC4ED-H-AC6V has an operating temperature range of -20° - 70° Celsius and a dielectric withstand voltage of 4,000 VAC. It has excellent insulation properties and can operate in harsh environments, with an IP54 ingress protection rating. The HC4ED-H-AC6V is also UL and cUL recognized and VDE certified.

In addition to its numerous features and advantages, the HC4ED-H-AC6V also has built-in protection mechanisms for both the control coils and the contactor. This includes a ground fault interrupter which will detect any short circuits or current surges and immediately cut the power to the contactor. This helps to prevent any equipment damage or disruptions to the system.

The HC4ED-H-AC6V is a versatile relay designed for a variety of applications. Its high current capacity and built-in protection mechanisms make it well-suited for heavy-duty applications. Its insulated case and reliable design also make it suitable for use in harsh and wet environments. All these features make the HC4ED-H-AC6V an ideal choice when it comes to signal relays up to 2 Amps.

The specific data is subject to PDF, and the above content is for reference