HC4ED-L-DC6V-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HC4ED-L-DC6V-D Signal Relays with up to 2 Amps are commonly used to control signals over long distances. This type of relay is ideal for applications such as wiring connections for audio and video equipment, remote control systems, and for use in industrial automation and robotics. The relays are powered by an AC or DC source and provide a closed circuit between two terminals when triggered.The relays possess a coil that is wound around a core made out of ferromagnetic material, typically iron. When voltage is applied to the coil, it creates a magnetic field which generates movement of the relay’s contact points. For this type of relay, the contact points are normally open until the relay is activated. Once activated, the contact points close, providing a complete circuit between two terminals.HC4ED-L-DC6V-D signal relays have a switching capacity of up to 2 amps. This rating defines the maximum amount of current flow that the relay contacts can handle safely without causing any damage. It is important to ensure that the power source used to drive the relay coil does not exceed the maximum switching capacity as this can damage the relay.The operation of the HC4ED-L-DC6V-D relay is controlled by an external switch, usually a switch with a power or low voltage rating, and is normally open until it receives a signal. The switch can be set up to trigger when current is applied to the coil and the contact points close, thereby connecting two terminals. Alternatively, the switch can be set up to trigger when voltage is removed from the coil and the contact points open which will break the circuit between the two terminals.When the contact points are closed, they form a complete circuit between two terminals and an electrical current will flow. This current passes through the internal circuitry of the relay and, depending on the design of the relay, will also pass through a series of resistors, capacitors, and/or transistors. The circuit will remain closed until the voltage is removed or the switch is triggered again.HC4ED-L-DC6V-D signal relays are a reliable and cost-effective way to control electrical signals over long distances. They are suitable for a variety of applications such as wiring connections for audio and video equipment, remote control systems, and for use in industrial automation and robotics. When selecting a relay of this type, it is important to ensure that the power source used has a current rating that does not exceed the maximum current of 2 amps.

The specific data is subject to PDF, and the above content is for reference