HCPL-0500-000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are an important component used by engineers in optoelectronic applications. They are used to, as the name implies, isolate electrical signals from one circuit to the other. This prevents the electrical interference between two circuits caused by the high voltage and current in one system, and the low voltage and current in the other. One such component is the HCPL-0500-000E: a Transistor-Photovoltaic Output optoisolator.

The HCPL-0500-000E is a 5mm wide, 4-pin DIP (dual in-line package) optoisolator with a maximum current rating of 25mA. It is available with different view distances, depending on the application. The typical emitting current is 1mA, with a maximum of 10mA, and the optoisolator has a typical forward voltage drop of 1.7V, with a maximum of 5V. Its typical rise and fall times are 150ns, with a minimum of 25ns.

The HCPL-0500-000E is used in many different optoelectronic applications, such as LED drivers, LED indicators, and light sensors. In LED drivers, it is used to switch the LEDs on and off, or dim them, while its light sensing capabilities can be used in various applications including intruder alarm systems, bill acceptors, and even motion detectors. As far as its structure is concerned, it is composed of an infrared LED mounted on a phototransistor base, isolated from the primary circuit.

The working principle behind the HCPL-0500-000E is based on the optoelectric effect, and the way it operates is quite simple. When a current is applied to the LED - the light source - it emits a beam of infrared light, which is directed towards the phototransistor. This light activates the phototransistor and changes its current state, thus isolating the primary circuit from the secondary circuit. This isolated circuit then controls the LED, and in turn, the LED controls the primary circuit again.

To sum it up, the HCPL-0500-000E is an optoisolator which works using the optoelectric effect and offers high levels of isolation between circuits - well-suited for LED drivers, LED indicators, and light sensors. It is small, affordable, and easy to integrate into any system, making it a viable choice for many applications.

The specific data is subject to PDF, and the above content is for reference