HCPL-063L-000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, or optical-electrical isolators, are components designed to provide galvanic isolation between a triggering device and a protected circuit. These components can be used to control power or isolate drive circuits, providing protection from electrical shock, overvoltage, and electromagnetic interference. The HCPL-063L-000E optoisolator is a logic output optoisolator with a wide range of applications.

The HCPL-063L-000E optoisolator consists of two devices in one package: a light-emitting diode (LED) and a phototransistor. The LED is triggered using a control voltage, and the phototransistor is used to detect the LED\'s light output and send an appropriate signal to the protected circuit. The control voltage can be digital or analog, and the logic output signal can be either high or low. This type of optoisolator can be used to detect very low levels of voltages and currents, and can be used to detect even very small changes in ambient light levels.

The HCPL-063L-000E is designed to provide up to 1000Vrms of optical isolation between input and output signals. This makes it ideal for use in circuits that may be exposed to high levels of noise or electrostatic discharge (ESD) or other conditions that can compromise the integrity of signals. Additionally, the HCPL-063L-000E has an extremely low input current requirement, making it power efficient and ideal for use in battery-powered applications.

The HCPL-063L-000E can be used in a wide variety of applications where noise immunity, power efficiency, and galvanic isolation are required. It is well-suited for use in motion control systems, automation, instrumentation, medical devices, security systems, and other applications. It can also be used for switch and logic interface circuits, communicating signals between two different circuits that don\'t share a common ground.

The HCPL-063L-000E optoisolator works on the principle of photocoupling. When the LED is triggered by the control voltage, it emits light which is picked up by the phototransistor. The phototransistor converts this light into a current that is used to drive the output circuit, providing logic level signals at the output. This optoisolator allows for extremely fast switching times, making it ideal for high speed logic and digital control systems.

The HCPL-063L-000E optoisolator is an ideal choice for applications that require a high degree of galvanic isolation, noise immunity, and power efficiency. Its fast switching times and low input current requirement makes it suitable for a wide range of applications, and its low cost makes it an attractive option for many designers. As such, the HCPL-063L-000E optoisolator is a popular choice for many electronic designs.

The specific data is subject to PDF, and the above content is for reference