HCPL-0720#500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as OptoCouplers, are electronic components used to physically and electrically isolate two circuits by using light. The HCPL-0720#500 is a very popularOptoisolator that features open Collector Output Logic and non-zero crossing output for logic signal isolation. It is ideally used in preventing the interference of high frequency signals and distortion in communication systems. It is also used in securing power line communication systems, protecting sensitive lines to prevent electromagnetic hums, and protecting the data line against voltage surges.

The HCPL-0720#500 offers low input current on the control side and high output current on the isolation side, as well as 4000VRMS isolation voltage. It also features a low operating current of 8mA and a turn-on time of 7µs typical. The optocoupler is typically used in industrial applications due to its precise timing specifications. This makes it a suitable product to be used as a signal bufferer or isolator between multiple control systems.

The logic output of the HCPL-0720#500 is based on the isolated output of the optocoupler, which is used for transmitting the logic signal. This is achieved by having a photo diode coupled to an output transistor. It comes with a nominal light output of 130mW typical at 5V and an off state current of zero. The output current of the device can be adjusted by adjusting the input current of the diode using the control or drive circuit. The opto coupler is also able to drive multiple circuits, with an output current as high as 100mA depending on the fabricated circuit.

The working principle of the HCPL-0720#500 is quite simple. The input circuit consists of an LED and an NPN transistor. An incoming voltage is put into the collector of the transistor, which then causes the LED to light which in turn activates the photo diode, sending an electrical signal to the output circuit. This signal is then processed by the output circuitry and can be used to control other circuits based on the desired output.

In conclusion, the HCPL-0720#500 is an ideal optocoupler for providing the highest electrical isolation between two circuits. It also offers a wide range of features that make it suitable for industrial applications such as signal buffering and isolation. It also provides a logic output that is capable of controlling multiple circuits with an output current of up to 100mA. Its working principle is based on the simple concept of an LED and NPN transistor, which produces the desired output. Thus, the HCPL-0720#500 is widely used in industrial applications as an effective optocoupler.

The specific data is subject to PDF, and the above content is for reference