HCPL-2201-360E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators — Logic Output

The HCPL-2201-360E optoisolator is an integrated circuit that combines both a light source and a photosensitive transistor in a single package. This optoisolator is used for isolating circuits or transmitting signals from one circuit to another without using a direct electrical connection.

The HCPL-2201-360E optoisolator is typically used in applications that require a logic output signal. The circuit components in the optoisolator use light to electrically isolate the input and output circuits. This optoisolator is particularly useful for protecting delicate circuits or circuits that are sensitive to noise, such as those used in medical applications, or circuits that need to operate in hazardous environments.

Working Principle

The HCPL-2201-360E optoisolator uses a phototransistor as the output component. The phototransistor is a semiconductor device that is sensitive to light, and its output current is proportional to the input light intensity. The input side of the circuit contains an LED and a resistor. When the input voltage is applied across the LED and resistor, the LED emits light of a certain intensity, and the phototransistor on the output side of the circuit is activated. The output current, which is dependent on the input current, is then fed to the load connected to the optoisolator.

The HCPL-2201-360E optoisolator also contains protective diodes and a capacitor on the input and output sides of the circuit to protect the optoisolator from transient voltage spikes. The protective diodes help to protect the circuit by providing a low-impedance path for any transient voltage spikes that may occur, and the capacitors help to provide additional protection by absorbing the transient voltages and preventing them from entering the optoisolator.

The HCPL-2201-360E optoisolator has a variety of applications, such as controlling relay coils, switching thyristors, controlling solenoids and motors, and controlling light-emitting diodes. It is also used to improve the signal-to-noise ratio of a signal by electrically isolating the input and output circuits.

Conclusion

The HCPL-2201-360E optoisolator is a useful device for applications that require a logic output signal. It helps to isolate input and output circuits and also provides protection against transient voltage spikes. This optoisolator can be used to control relay coils, switching thyristors, controlling solenoids and motors, and controlling light-emitting diodes, as well as improving signal-to-noise ratios.

The specific data is subject to PDF, and the above content is for reference