HCPL-2211-000E

Data Rate:	5MBd
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	4.5 V ~ 20 V
Current - DC Forward (If) (Max):	10mA
Voltage - Forward (Vf) (Typ):	1.5V
Rise / Fall Time (Typ):	30ns, 7ns
Propagation Delay tpLH / tpHL (Max):	300ns, 300ns
Series:	--
Current - Output / Channel:	25mA
Output Type:	Push-Pull, Totem Pole
Input Type:	DC
Common Mode Transient Immunity (Min):	5kV/µs, 10kV/µs
Voltage - Isolation:	3750Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output: HCPL-2211-000E Application Field and Working Principle

Optoisolators are electronic devices used for isolated electrical communication between two circuits. They provide isolation between two circuits even when the two are electrically connected. The HCPL-2211-000E is an optoisolator belonging to the logic output family. It has applications in industrial automation, control and instrumentation applications.The HCPL-2211-000E is a small, but powerful light-emitting diode (LED) optoisolator, housed in a type-1D surface-mount package. It includes an infrared LED and a silicon phototransistor in a small plastic package. The package meets UL and CSA flammability ratings and industry-standard creepage and clearance requirements. The forward current and voltage ratings for the LED are specified at a 5V maximum and a 150mA maximum. The package\'s insulation voltage rating is typically 1250Vrms for AC and DC connections.The HCPL-2211-000E works through the application of light-sensing technology. When a logic signal is applied, an internal photo-sensitive device causes the LED to turn on, and the phototransistor turns off. A 2.5 ~ 5.5 volts current source supports the LED current. A logic output of up to 15mA is available, and the phototransistor is rated for at least 100mA. The HCPL-2211-000E has several advantages over standard optoisolators. Its extremely fast switching time increases the performance of high speed applications. Its reverse blocking voltage allows a high level of protection against voltage transients and ground level shifts. The low current and voltage ratings available with the HCPL-2211-000E help to reduce power consumption and extend battery life. With a unique package construction, the device is UL and CSA approved and offers excellent creepage and clearance.The HCPL-2211-000E, as part of the logic output family, is a suitable optoisolator for a wide variety of different applications. It offers a low forward voltage drop of about 1.1V, which allows for increased power savings in the system. Its high breakdown voltage of 1250Vrms and low output current of 15mA helps protect the circuit from electrical transients and ground level shifts. It also offers a fast switching speed of 0.1µS and excellent creepage and clearance. This makes the HCPL-2211-000E a suitable choice for use in industrial automation, control, and instrumentation applications. In industrial automation applications, the HCPL-2211-000E can be used to isolate equipment from control systems. This allows logic signals to pass from the control to the equipment while being electrically isolated. This is beneficial in providing both safety and reliability to the system. By providing a reliable and reliable connection, it helps to reduce the potential for electrical transients and ground level shifts. By providing a fast switching time, the optoisolator can also help to increase the speed of the operation.In control and instrumentation applications, the HCPL-2211-000E can be used to isolate two separate instrumentation circuits. This allows for accurate measurement of the signal being sent through the optoisolator. By providing a large amount of creepage and clearance, the optoisolator can help protect against electrical transients and ground level shifts. Its fast switching time of 0.1µS makes it suitable for high speed applications. It also helps reduce power consumption and extends battery life. The HCPL-2211-000E is a suitable optoisolator for industrial automation, control, and instrumentation applications. It offers a low forward voltage drop and a high breakdown voltage, along with an extremely fast switching time. Its package construction provides excellent creepage and clearance, and the low current and voltage ratings help to reduce power consumption and extend battery life. All of these features make the HCPL-2211-000E an excellent choice for an optoisolator for industrial automation, control, and instrumentation applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description