Allicdata Part #: | 516-1068-5-ND |
Manufacturer Part#: |
HCPL-2300 |
Price: | $ 2.77 |
Product Category: | Isolators |
Manufacturer: | Broadcom Limited |
Short Description: | OPTOISO 3.75KV OPEN COLL 8DIP |
More Detail: | Logic Output Optoisolator 5MBd Open Collector, Sch... |
DataSheet: | HCPL-2300 Datasheet/PDF |
Quantity: | 1000 |
850 +: | $ 2.51370 |
Data Rate: | 5MBd |
Supplier Device Package: | 8-DIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 85°C |
Voltage - Supply: | 4.75 V ~ 5.25 V |
Current - DC Forward (If) (Max): | 5mA (Typ) |
Voltage - Forward (Vf) (Typ): | 1.3V |
Rise / Fall Time (Typ): | 40ns, 20ns |
Propagation Delay tpLH / tpHL (Max): | 160ns, 200ns |
Series: | -- |
Current - Output / Channel: | 25mA |
Output Type: | Open Collector, Schottky Clamped |
Input Type: | DC |
Common Mode Transient Immunity (Min): | 100V/µs |
Voltage - Isolation: | 3750Vrms |
Inputs - Side 1/Side 2: | 1/0 |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The HCPL-2300 optoisolator is a type of optoelectronic component commonly referred to as a logic output optoisolator. An optoisolator, also known as an optocoupler, is an optoelectronic component which uses an optical signal to electrically isolate two circuits while still providing signal or power transmission between them. The HCPL-2300 works by using a light-emitting diode to emit light, which is then detected by a photo detector on the other side of the device. When the light is detected, it allows electrical current to flow through the optoisolator, thus providing the necessary electrical isolation.
The HCPL-2300 optoisolator is compatible with a wide range of logic families and electronics. It is ideal for applications that require isolation of digital signals, such as isolation of a 5V input from a 3.3V output, because it provides a high degree of electrical isolation. It is also suitable for low-voltage analogue signal isolation, such as in automotive oxygen sensor control. The HCPL-2300 optoisolator can also be used for applications such as electric motor control, high-frequency switching and pulse-width modulation, and noise filtering.
The HCPL-2300 optoisolator’s working principle is based on the transfer of electrical signals between two points without direct electrical contact. The light-emitting diode (LED) on one side of the optocoupler emits light, which is then detected by the photo detector on the other side of the device. This detection allows current to flow between the LEDs and the photo detector, thus creating the required electrical isolation. The amount of electrical isolation provided by the HCPL-2300 depends on the physical characteristics of the device, such as the size of the detector, the distance between the detectors, and the amount of light emitted by the LED.
The HCPL-2300 optoisolator is compatible with a variety of logic families, including TTL, AVR, PIC, HC11, HC12, and HCS12. It has a wide range of output current capabilities, from 20mA to 240mA, and is capable of operating at speeds of up to 4000Hz. It has a maximum power dissipation of 500mW, and an operating temperature range of -40 degrees Celsius to +85 degrees Celsius. It has a high level noise margin of 250mV, allowing for a wide range of signal isolation.
The HCPL-2300 is suitable for a variety of applications in both the digital and analogue domains. It is particularly useful for digital applications, such as switching and pulse width modulation, and for analogue applications such as noise filtering and emergency communication systems. Its ability to provide high levels of electrical isolation makes it ideal for isolating digital signals, such as a 5V input from a 3.3V output, while still allowing for signal or power transmission between them.
In summary, the HCPL-2300 optoisolator is a type of optoelectronic component commonly referred to as a logic output optoisolator. It works by using a light-emitting diode to emit light, which is then detected by a photo detector on the other side of the device. This detection allows current to flow between the LEDs and the photo detector, thus creating the required electrical isolation. It is compatible with a wide range of logic families and electronics, and is ideal for applications requiring isolation of digital signals, as well as low-voltage analogue signal isolation.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
HCPL-090J-500E | Broadcom Lim... | 3.42 $ | 1000 | DGTL ISO 2.5KV GEN PURP 1... |
HCPL-0900 | Broadcom Lim... | 4.29 $ | 13 | DGTL ISO 2.5KV GEN PURP 8... |
HCPL-9030-000E | Broadcom Lim... | -- | 84 | DGTL ISO 2.5KV 2CH GEN PU... |
HCPL-092J | Broadcom Lim... | 8.19 $ | 591 | DGTL ISO 2.5KV GEN PURP 1... |
HCPL-9030 | Broadcom Lim... | 5.64 $ | 26 | DGTL ISO 2.5KV 2CH GEN PU... |
HCPL-901J | Broadcom Lim... | 8.11 $ | 5 | DGTL ISO 2.5KV 4CH GEN PU... |
HCPL-250L-000E | Broadcom Lim... | 0.43 $ | 1000 | OPTOISO 3.75KV TRANS W/BA... |
HCPL-270L-000E | Broadcom Lim... | 0.43 $ | 1000 | OPTOISO 3.75KV DARLINGTON... |
HCPL-250L-300E | Broadcom Lim... | 0.43 $ | 1000 | OPTOISO 3.75KV TRANS W/BA... |
HCPL-0500-060E | Broadcom Lim... | 0.44 $ | 1000 | OPTOISO 3.75KV TRANS W/BA... |
HCPL-0500-500E | Broadcom Lim... | 0.44 $ | 1000 | OPTOISO 3.75KV TRANS W/BA... |
HCPL-250L-560E | Broadcom Lim... | 0.46 $ | 1000 | OPTOISO 3.75KV TRANS W/BA... |
HCPL-250L-320E | Broadcom Lim... | 0.46 $ | 1000 | OPTOISO 5KV TRANS W/BASE ... |
HCPL-250L-520E | Broadcom Lim... | 0.46 $ | 1000 | OPTOISO 5KV TRANS W/BASE ... |
HCPL-0500-560E | Broadcom Lim... | 0.46 $ | 1000 | OPTOISO 3.75KV TRANS W/BA... |
HCPL-2730 | Broadcom Lim... | -- | 16 | OPTOISO 3.75KV 2CH DARLNG... |
HCPL-0730 | Broadcom Lim... | -- | 41 | OPTOISO 3.75KV 2CH DARLNG... |
HCPL-263L-520E | Broadcom Lim... | 1.45 $ | 1000 | OPTOISO 5KV 2CH OPEN COL ... |
HCPL-2630#500 | Broadcom Lim... | 1.46 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
HCPL-2211 | Broadcom Lim... | 1.46 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
HCPL-2212 | Broadcom Lim... | 1.46 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
HCPL-2630-520 | Broadcom Lim... | 1.47 $ | 1000 | OPTOCOUPLER 10MBD UL+T/RL... |
HCPL-263L-000E | Broadcom Lim... | 1.48 $ | 1000 | OPTOISO 3.75KV 2CH OPEN C... |
HCPL-2212#300 | Broadcom Lim... | 1.48 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
HCPL-2212#060 | Broadcom Lim... | 1.48 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
HCPL-2211#300 | Broadcom Lim... | 1.48 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
HCPL-2211#060 | Broadcom Lim... | 1.48 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
HCPL-0710-060E | Broadcom Lim... | 1.49 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
HCPL-263L-060E | Broadcom Lim... | 1.49 $ | 1000 | OPTOISO 3.75KV 2CH OPEN C... |
HCPL-263L-020E | Broadcom Lim... | 1.49 $ | 1000 | OPTOISO 5KV 2CH OPEN COLL... |
HCPL-2211#360 | Broadcom Lim... | 1.5 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
HCPL-2212#360 | Broadcom Lim... | 1.5 $ | 1000 | OPTOISO 3.75KV PUSH PULL ... |
HCPL-263L-320E | Broadcom Lim... | 1.51 $ | 1000 | OPTOISO 5KV 2CH OPEN COL ... |
HCPL-2630#300 | Broadcom Lim... | 1.52 $ | 1000 | OPTOISO 3.75KV OPEN COLL ... |
HCPL-2630#020 | Broadcom Lim... | 1.52 $ | 1000 | OPTOISO 5KV 2CH OPEN COLL... |
HCPL-0466 | Broadcom Lim... | -- | 1000 | OPTOISO 3.75KV OPN COLLEC... |
HCPL-2630#320 | Broadcom Lim... | 1.53 $ | 1000 | OPTOISO 5KV 2CH OPEN COL ... |
HCPL-0466#500 | Broadcom Lim... | 1.54 $ | 1000 | OPTOISO 3.75KV OPN COLLEC... |
OPTOISO 5.3KV TRI-STATE 8SMDLogic Output...
OPTOISO 5KV PUSH PULL 6SSOLogic Output O...
OPTOISO 2.5KV OPEN COLL 8SSOPLogic Outpu...
OPTOISO 1.5KV OPN COLLECTOR 8DIPLogic Ou...
OPTOISO 3.75KV PUSH PULL 8DIP GWLogic Ou...
OPTOISO 7.5KV OPEN COLL 10DIPLogic Outpu...