HCPL-2411

Series:	--
Packaging:	Tube
Part Status:	Active
Number of Channels:	1
Inputs - Side 1/Side 2:	1/0
Voltage - Isolation:	2500Vrms
Common Mode Transient Immunity (Min):	1kV/µs
Input Type:	DC
Output Type:	Tri-State
Current - Output / Channel:	25mA
Data Rate:	40MBd
Propagation Delay tpLH / tpHL (Max):	55ns, 55ns
Rise / Fall Time (Typ):	20ns, 10ns
Voltage - Forward (Vf) (Typ):	1.3V
Current - DC Forward (If) (Max):	10mA
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-DIP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HCPL-2411 optoisolator is a motor control device designed for the computer, logic, and industrial control market. It provides isolation between the high voltage and low voltage sides of the application due to its optocoupler design. The HCPL-2411 consists of two components: a photodarlington detector and an infrared light emitting diode. This optoisolator is designed to be used in logic level applications when the “on” voltage is 5V. It has a peak collector current of 180mA, a breakdown voltage of 60V, and features a typical minimal output collector capacitance of 10pF.The HCPL-2411 optoisolator is an ideal choice for motor controller applications, due to its safety-focused isolation. The device is also able to provide protection from industrial noise, electromagnetic interference (EMI), and other situations with high voltage at the input.The photodarlington detector acts as an interface between the HCPL-2411 and the phototransistor, which is a current-to-voltage conversion component. When light energy is applied to the phototransistor, a high voltage potential is generated at its output. Due to the photodarlington\'s high gain, it is capable of converting even the slightest light energy into an output potential, allowing the HCPL-2411 to be activated with minimal input.The infrared light emitting diode (LED) in the HCPL-2411 optoisolator is responsible for the source of light energy. It requires a low current at a particular frequency in order to generate light energy. The LED, which is the source of light energy, is connected to the input side of the optoisolator. When a high voltage is applied to the LED, it emits a light signal which is then detected by the photodarlington detector.The output of the HCPL-2411 optoisolator is a logic level signal. The action of the photodarlington detector and the infrared LED is to convert the high voltage potentials into a logical output such as ‘high’ or ‘low’. This allows the HCPL-2411 to be used in systems which require a logic level signal as the output. The HCPL-2411 optoisolator also provides a number of other benefits such as low crosstalk, wide common mode noise immunity and high common mode rejection ratio. These features allow the optoisolator to be used in systems which require a high amount of clean data transmission.The HCPL-2411 optoisolator has a wide range of application fields for both motor control and logic level applications. It is ideal for use in automotive, industrial, telecom, audio, consumer, and HVAC applications. It can also be used as a digital isolator, an analog signal buffer, or as a power line isolator.Overall, the HCPL-2411 optoisolator is an extremely effective optoisolator due to its high voltage isolation, durable construction, and substantial common mode rejection ratio. It provides digital or analog isolation between two systems while also providing superior protection against high levels of industrial noise, EMI, and other situations. The HCPL-2411 optoisolator is an ideal choice for motor control and logic level applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description