HCPL-2601#500

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Number of Channels:	1
Inputs - Side 1/Side 2:	1/0
Voltage - Isolation:	3750Vrms
Common Mode Transient Immunity (Min):	10kV/µs
Input Type:	DC
Output Type:	Open Collector, Schottky Clamped
Current - Output / Channel:	50mA
Data Rate:	10MBd
Propagation Delay tpLH / tpHL (Max):	100ns, 100ns
Rise / Fall Time (Typ):	24ns, 10ns
Voltage - Forward (Vf) (Typ):	1.5V
Current - DC Forward (If) (Max):	20mA
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	8-SMD, Gull Wing
Supplier Device Package:	8-DIP Gull Wing

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HCPL-2601#500: Introduction

The HCPL-2601#500 opto-isolator is a high-speed, logic output phototransistor optoisolator. It is designed for signal isolation applications involving logic signals up to 10 MHz. The unique architecture of the optoisolator provides enhanced noise resistance and high speed operation, and the wide operating voltage range (from 4.5V to 16V) and wide temperature range (from -55°C to 125°C) make it ideal for use in a wide range of applications. The HCPL-2601#500 is available in a variety of package types and pin configurations.

HCPL-2601#500: Application Fields

The HCPL-2601#500 opto-isolator can be used in a wide range of applications, including industrial, telecom, computer, medical, and consumer applications. It is ideal for applications where wide voltage and wide temperature ranges are required. It also provides necessary noise immunity and isolation for high speed applications.The HCPL-2601#500 can be used in data communication and signal conditioning applications. It can be used to transmit data signals across two circuits, for example between a digital and an analog circuit. It can also be used for noise filtering in applications where noise must be kept to a minimum. It can also be used for monitoring and controlling signals.Moreover, the HCPL-2601#500 can be used in many other applications such as power control, caching, and motor control systems, and it is also ideal for applications where noise immunity and high speed are required.

HCPL-2601#500: Working Principle

The HCPL-2601#500 opto-isolator consists of an input device, an output device, and an isolating medium. The input device is an emitter which is usually a light emitting diode (LED). The output device is a photo transistor, which is a type of transistor that responds to light. The isolating medium is an acrylic resin, which isolates the electrical current in the two circuits that the opto-isolator connects.The LED (input device) generates light when it is connected to a power source, such as a microcontroller or a logic circuit. The light is then absorbed by the photo transistor (output device). The photo transistor then produces a small electrical current, which is sent to the external circuit. The current is then isolated by the acrylic crystal, which separates the input and output circuits so that they don’t interact with each other.

Conclusion

The HCPL-2601#500 opto-isolator is a versatile and reliable solution for a wide range of applications. Its high speed operation and wide voltage and temperature ranges make it an ideal choice for high-performance applications that require isolation and noise immunity. The opto-isolator’s working principle is based on the use of an LED and photo transistor, connected through an acrylic crystal, to isolate and shield two circuits from each other.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description