HCPL-2731-000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output, is a type of optically isolated component used to provide electrical isolation between two parts of a circuit or system. The most common type of optoisolator in this category is the HCPL-2731-000E. This particular optoisolator is a single-channel optically coupled isolator that provides up to 3000 Volts of electrical isolation between the input and output sides when used in applications. In addition, it has dual Galvanic Isolation.

The HCPL-2731-000E provides a 50µA, low scale current signal from the photo-Transistor. This output can drive an external load from 5mA to 25mA, making it ideal for telecommunications, industrial equipment, and robotics applications. In addition, the HCPL-2731-000E has low On-state Resistance (Ro) and high Off-state Resistance (Roff) characteristics, making it particularly suitable for applications such as pulse width modulation (PWM) circuits where low voltage is needed for low level signals.

The HCPL-2731-000E has two main components: 1) a Photodiode, which is sensitive to changes in the light level of the circuit, and 2) a Transistor, which is capable of storing an electrical energy current when the level of light changes. When the light level in the circuit changes, the Photodiode will send an electrical energy current through the Transistor. This current is then converted into a voltage signal that can be used to control the output of the optoisolator.

The working principle of the HCPL-2731-000E is based on anode to Cathode electric Coefficient of potential. Its construction consists of two compartments in series, the Front compartment and the Rear compartment. The Front compartment consists of a light sensitive element, such as a Photodiode, located at the anode end of the optoisolator. The light sensitive element captures the light from a light source within the circuit.

The Rear compartment contains the Photo-Transistor, which is the output component of the optoisolator. This phototransistor has a high resistance characteristic, meaning it can store an electrical charge even when the light level in the circuit has reduced. The stored electrical charge is then released to the circuit when the light source reaches a certain threshold. The output from the Photo-Transistor is used to control the electrical devices within the circuit.

HCPL-2731-000E optoisolator offers a variety of advantages for applications. The optoisolator has the ability to be used in high voltage and high frequency applications, as well as providing a high level of isolation between the input and output side of the system. Additionally, the high resistance characteristics of the Photo-Transistor make it particularly suited to use in PWM circuits. Lastly, the optoisolator offers low power consumption and a fast switching speed, making it ideal for a variety of different applications in industrial and consumer electronics.

The specific data is subject to PDF, and the above content is for reference