HCPL-3180-360E

Series:	--
Packaging:	Tube
Part Status:	Active
Technology:	Optical Coupling
Number of Channels:	1
Voltage - Isolation:	3750Vrms
Common Mode Transient Immunity (Min):	10kV/µs
Propagation Delay tpLH / tpHL (Max):	200ns, 200ns
Pulse Width Distortion (Max):	65ns
Rise / Fall Time (Typ):	25ns, 25ns
Current - Output High, Low:	2A, 2A
Current - Peak Output:	2.5A
Voltage - Forward (Vf) (Typ):	1.5V
Current - DC Forward (If) (Max):	25mA
Voltage - Supply:	10 V ~ 20 V
Operating Temperature:	-40°C ~ 100°C
Mounting Type:	Surface Mount
Package / Case:	8-SMD, Gull Wing
Supplier Device Package:	8-DIP Gull Wing
Approvals:	CSA, IEC/EN/DIN, UR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Isolators - Gate Drivers: HCPL-3180-360E Application Field and Working Principle

HCPL-3180-360E is a regenerative isolator gate drive specification designed by Broadcom, a special IC that turns on germanium transistors. This isolator gate driver is designed to be used as a high-frequency transmission and isolation application device for circuits where data and power is shared between two circuits. In modern electronics, isolators are commonly employed to prevent external interference that can interfere with the operation of delicate circuits. As the need for higher speeds and better isolate applications has grown, so has the demand for a reliable and high performance isolator gate driver such as the HCPL-3180-360E. It provides the functionality of a traditional isolated gate drive product with increased drive quality to reduce errors and distortion on high-frequency signals.The HCPL-3180-360E is designed to be used in a wide range of different applications, including communications, consumer electronics, medical systems, industrial control systems, and automotive applications. It can work with 3.3 to 24 volts in either voltage mode (Vm) or current mode (Ic). It features high-speed transmission with minimal signal distortion. The working principle of Broadcom’s HCPL-3180-360E is based on regenerative transfer circuit topology which has three key components - an isolated voltage source, a high-performance CMOS switch and a low-dropout regulator. The voltage source is used to generate the necessary power for the gate drive. The CMOS switch is used to provide isolation between the source and the output and the regulator provides the necessary low-level voltage for the gate drive.The driver operates in a single-chip, low-power, closed-loop configuration to ensure accurate isolation and drive quality. The signal output is connected directly to the gate of the germanium transistor, while the isolator output, which is also connected to the load, is used to measure the performance of the gate drive. The HCPL-3180-360E features a high current sharing capability which helps provide superior reliability and performance. It also provides additional features such as cut-off, inrush and overcurrent protection, thermal shutdown and diagnostics. Additionally, the device can be operated with either a battery or a DC power supply.In summary, the HCPL-3180-360E is Broadcom’s flagship isolator gate drive device, designed for high-frequency data transmission and isolation applications where speed and accuracy are critical. With its wide operating voltage range, high current sharing capability, and comprehensive feature-set, the HCPL-3180-360E is a reliable and high performance solution for isolator gate drive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description