HCPL-3760-500E

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Number of Channels:	1
Voltage - Isolation:	3750Vrms
Current Transfer Ratio (Min):	--
Current Transfer Ratio (Max):	--
Turn On / Turn Off Time (Typ):	4.5µs, 8µs
Rise / Fall Time (Typ):	14µs, 0.4µs
Input Type:	AC, DC
Output Type:	Darlington
Voltage - Output (Max):	20V
Current - Output / Channel:	30mA
Voltage - Forward (Vf) (Typ):	--
Vce Saturation (Max):	--
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	8-SMD, Gull Wing
Supplier Device Package:	8-DIP Gull Wing

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The HCPL-3760-500E Optoisolator Transistor, Photovoltaic Output is an optically-coupled device that uses a light-emitting diode (LED) to transfer electrical signals from one circuit to another without any direct electrical connection. It may be used in a wide variety of applications when electrical isolation between input and output is desired. This device provides a high degree of isolation and low propagation delay, making it ideal for low power, low voltage, and high speed applications such as industrial, automotive, and consumer electronics. It is available in a variety of packages, with typical peak-current ratings up to 100mA.

Application Field

HCPL-3760-500E optoisolators are often used to block measurement of hazardous voltages in circuits, protect sensitive circuitry from transients, and isolate low-level data signals. They are often used in medical devices, control systems, and handheld instruments. They can also be used in transducer interface circuits, digital circuitry, and power control applications. Additionally, their low voltage and low power consumption make them ideal for mobile and portable applications.

Working Principle

The HCPL-3760-500E optoisolator consists of a gallium arsonide infrared LED at the input, and an output phototransistor. When a voltage is applied to the LED, it emits infrared light which is detected by the phototransistor. This phototransistor then generates a current which is amplified and transferred to the output side of the device. This output current can be used to control a variety of electomechanical or electronic functions depending on the application.The HCPL-3760-500E optoisolator offers an excellent level of isolation between input and output, with a typical isolation voltage of 500VRMS. It also has a low propagation delay, an operating temperature range from -40°C to 125°C, and a peak current handling capacity of up to 100mA.Additionally, the HCPL-3760-500E is a dual-channel optoisolator, meaning that it has two independent channels which can be used to transfer two different input signals to two separate outputs. This makes it ideal for applications where two or more isolated signals need to be transmitted across the same circuit.

Conclusion

The HCPL-3760-500E Optoisolator Transistor, Photovoltaic Output is an excellent choice for applications where electrical isolation between input and output is desired. It offers a high degree of isolation, low propagation delay, and can handle peak currents of up to 100mA. It is frequently used in medical devices, control systems, and handheld devices, as well as transducer interface circuits, digital circuitry, and power control applications. In addition, its dual-channel design allows for up to two separate input signals to be transmitted across a single circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description