HCPL-573K#200

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as opto-couplers, are devices used to electrically isolate two circuits from each other. One of the most important types of optoisolator is a Transistor, Photovoltaic Output (HCPL-573K#200) device. This article will discuss the application fields and the working principle of the HCPL-573K#200.

Application fields of HCPL-573K#200

The HCPL-573K#200 Transistor, Photovoltaic Output optoisolator is a single-channel optoisolator which is widely used in a variety of applications. Its primary application fields are electronic circuits that require isolation. This is true for both high-voltage applications and low-voltage applications. In high-voltage application, the HCPL-573K#200 optoisolator helps to protect circuits from excessive electrical noise and voltage spikes, while in low-voltage applications, it can provide better isolation between working circuits. In addition, the HCPL-573K#200 optoisolator is widely used in medical equipment, electrical switching systems, and consumer electronics.

Working Principle of the HCPL-573K#200

The HCPL-573K#200 optoisolator consists of a phototransistor and a photodiode. The photodiode is used to detect incoming light signals. It converts these light signals into electrical signals that are amplified by the phototransistor. The phototransistor then generates a current output signal based on the strength of the incoming signal.

The optoisolator’s photodiode and phototransistor work together to provide electrical isolation. The incoming electrical signal is first converted to light by the photodiode. This light signal is then transmitted through a gap between the phototransistor and the photodiode. The gap between the two devices ensures that no electrical connection exists between the two circuits. The phototransistor then amplifies the light signal and generates a current output signal.

The HCPL-573K#200 optoisolator has an isolation voltage rating of 5 kVrms, which means it can pass electrical signals up to 5 kVrms without any loss in performance. This makes it well-suited for use in high-voltage applications, such as medical equipment. In addition, the HCPL-573K#200 has a low input current requirement of only 1 mA, which makes it suitable for low-voltage applications.

Conclusion

The HCPL-573K#200 Transistor, Photovoltaic Output optoisolator is a widely used optoisolator for both high- and low-voltage applications. It provides electrical isolation between circuits and has an isolation voltage rating of 5 kVrms. The HCPL-573K#200 optoisolator works by converting incoming electrical signals to light, and then amplifying the light signal to an output current. This makes it suitable for a variety of applications, from medical equipment to consumer electronics.

The specific data is subject to PDF, and the above content is for reference