HD02-T Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HD02-T is a kind of bridge rectifier which works as a diode. It contains two anode and two cathode, each anode having two independent connections to two cathodes. The device is configured in such a way that current flows from the anode to the cathode when the reverse voltage is applied to the anode. Upon removal of the reverse voltage, current is driven from the cathode to the anode. This bridge rectifier also has an isolation shield to help reduce unwanted electromagnetic interference.A bridge rectifier is used to convert AC power to DC power in applications such as power supplies, motor control, industrial automation, lighting, and automotive electronics. The bridge rectifier circuit requires only four power diodes, which are grouped into two pairs that are connected together in the circuit diagram. The components of the bridge rectifier, such as the power diodes, capacitors, and inductors, are used to smooth out the current waveform. An AC power supply is an alternating current (AC) electric power source. It sends an alternating voltage waveform, or pulses, through its electric circuit. The waveform is a sine wave, and its frequency is determined by the type of power supply. An AC waveform contains a “positive” and “negative” voltage peak, and a bridge rectifier converts this waveform into a steady DC current. The HD02-T bridge rectifier also has a single phase power control for controlling the input voltage. This bridge rectifier is capable of controlling a wide range of input AC voltage from 120 to 250 volts. The AC power is then rectified and the output voltage is adjusted by the power control. This provides a stable, regulated output voltage of 24 volts, suitable for powering many different types of electronic components. The working principle of the HD02-T bridge rectifier is based on the concept of diode based power rectification. This type of bridge rectifier works by alternately connecting each of the anodes to the cathode at regular intervals, known as the power control cycle. This alternation allows the bridge rectifier to convert the alternating current into direct current, and the output voltage is regulated by the variable power cycle.The HD02-T bridge rectifier is a reliable, cost-effective, and efficient solution for converting AC power to DC power. It is an ideal component for applications where high current and low voltages are required. Its single phase power control allows it to handle a wide range of input AC voltage, and the output voltage can be regulated according to the application needs. This bridge rectifier is smaller and lighter than usual bridge rectifiers and is suitable for use in various kinds of electronic systems.

The specific data is subject to PDF, and the above content is for reference