HDBLS107G RDG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HDBLS107G RDG is a four-terminal, high power Schottky diode bridge rectifier. It is used in a wide range of applications, especially those associated with power management, power control, and power conversion. This bridge rectifier is suitable for use as a replacement for standard Schottky diode bridges in many different types of applications, including those that use multiple switching power supplies. It is also applicable in the rectification of unipolar direct current (DC) signals.

The bridge rectifier includes four diode anodes. Each anode is connected to one of the four diode cathodes and the cathodes, in turn, are connected to each other. This arrangement proves to be advantageous as it allows the bridge to operate on both AC and DC signals. The bridge can also be used for current control, since the forward current can be regulated by changing the cathode to anode current bias ratios.

The HDBLS107G RDG is designed for high-power, high-efficiency applications. It is capable of providing up to 1000VDC with a maximum forward input current rating of up to 4A. The bridge rectifier is specified with a -55°C to +150°C storage and operating temperature range. It is also specified with a peak forward surge current rating of up to 8A and a reverse voltage rating of up to 4000VDC.

The HDBLS107G RDG can be used in a variety of applications where it will provide a low voltage drop and high efficiency, such as in switching power supplies, motor control, solar power, medical electronics, and digital logic circuits. The bridge rectifier is also suitable for use in AC/DC rectification and switch mode power supplies.

The working principle of the HDBLS107G RDG bridge rectifier is based on the use of four anode Schottky diodes connected in a bridge configuration. When a positive applied voltage is applied to the input terminals, the corresponding diode anode will become forward biased, allowing current to flow in the forward direction. This forward current is then passed through the remaining three anodes in sequence, eventually passing through the other input terminal. When the applied voltage is negative, the diode anodes reverse bias, preventing current from flowing from one input terminal to the other.

The bridge rectifier can be used to provide controlled switching and power control. By adjusting the cathode-anode bias ratios, the HDBLS107G RDG can be used to maximize efficiency and minimize losses often found in multiple switching power supplies. The rectifier can also be used to provide a continuous and stable output voltage, while providing high power conversion efficiency.

The HDBLS107G RDG is a four-terminal, high power Schottky diode bridge rectifier that is suitable for a wide range of applications. It offers excellent performance, efficiency, and power control. With its ability to provide up to 1000VDC and its 4000VDC reverse voltage rating, it can be used as a replacement for standard Schottky diode bridges in many different types of applications. The bridge rectifier is also suitable for use in AC/DC rectification and switch mode power supplies. The working principle of the bridge rectifier is based on the use of four anode Schottky diodes connected in a bridge configuration, allowing for current to flow in the forward direction when a positive voltage is applied and preventing current from flowing when a negative voltage is applied.

The specific data is subject to PDF, and the above content is for reference