HDM14JT36K0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as HDM14JT36K0, are resistors which are designed to connect circuit components through a mounting hole drilled into a printed circuit board. Through hole resistors are relatively large, in comparison to other types of resistor, which makes them useful for applications which require high power and voltage ratings. It is this size that allows them to dissipate heat, making them suitable for drawing more current than other types of resistors.

The basic application field of a through hole resistor such as the HDM14JT36K0 include current limiting, voltage dividing, electronic timer circuits, and pulse circuits. In current limiting applications, the resistor is used to keep current within a designed level, making sure that components further along in the circuit are not overloaded. In voltage dividing applications, the resistor can be used to divide a supply voltage into several output voltages, for use in multiple circuits. Electronic timer circuits use resistors to establish the time required for functions to control pulse width, while pulse circuits utilize resistance to create a signal pulse.

The working principle of a through hole resistor, such as the HDM14JT36K0, is based on Ohm’s Law. This law states that the resistance of a resistor is positively proportional to the voltage and current passing through the resistor. When a voltage is applied to the resistor, the current is limited, since the resistor opposes the flow of electric current. This opposition is known as resistance, and is measured in ohms.

To operate the HDM14JT36K0, power is supplied to one contact, while the other contact is connected to ground. The current will pass through the resistor, with the resistor limiting the voltage and current at the same time. The voltage drop across the resistor is measured in voltage, while the current is measured in amperes. By calculating the amount of electric current and voltage passing through the resistor, the exact amount of power dissipated by the resistor can be calculated. Depending on the power requirements of the application, the resistance of the resistor can be chosen accordingly.

In addition to all these, through hole resistors, such as the HDM14JT36K0, are often used for protection of sensitive components, such as semiconductors and light-emitting diodes. They can also be used in digital circuits for protection against overvoltage, noise and high temperature. By selecting the right type of resistor for a given application, it is possible to prevent the circuit from being damaged.

In conclusion, the HDM14JT36K0 is a through hole resistor which is used mainly in current limiting, voltage dividing, timer and pulse circuit applications. Its working principle is based on Ohm’s Law, where the resistance is directly proportional to the voltage and current passing through the resistor. The resistor is designed to limit the voltage and current that passes through it, protecting both the circuit and the sensitive components it connects. By selecting the right type of resistor for a given application, it is possible to prevent the circuit from being damaged.

The specific data is subject to PDF, and the above content is for reference