HDM14JT3R60

Series:	HDM
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	3.6 Ohms
Tolerance:	±5%
Power (Watts):	0.25W, 1/4W
Composition:	Carbon Film
Features:	Moisture Resistant
Temperature Coefficient:	-500/ +350ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.071" Dia x 0.126" L (1.80mm x 3.20mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors is an important electronic components used in a huge variety of industries. HDM14JT3R60 is one of the most popular through hole resistors and it is widely used in automotive, aerospace and industrial applications. This article will focus on the application fields and working principle of HDM14JT3R60.HDM14JT3R60 is a surface mounted device (SMD) type of through hole resistors that usually comes in a white casing with a black label. It has two short leads protruding from the sides of the casing and the overall dimensions are roughly 14mm in length, 15.5mm in width and 11.2mm in height. The overall resistance is measured in ohms and it ranges from 0.1 ohm to 99 megohms, although higher resistance values are also available in some special cases.The main applications of the HDM14JT3R60 are in automotive, aerospace and industrial applications. In automotive use, the HDM14JT3R60 is usually used for sensing circuits and for controlling current flow. In aerospace applications, the HDM14JT3R60 is used for power conversion and control and is also used in the control of electronic instruments. In industrial applications, The HDM14JT3R60 is used for various low-level signal measurements, such as in pressure and temperature sensors.In addition to its various application fields, the HDM14JT3R60 works by regulating electric current through two wider spacing plates. The plates are separated by a ceramic insulator filled with an electrolyte. This electrolyte acts as a resistor and is designed to reduce the resistance of each plate for a given amount of voltage. This allows the HDM14JT3R60 to precisely control the amount of current allowed through the resistor.The HDM14JT3R60 also uses a ceramic housing, which helps to further reduce noise and improve the overall performance of the resistor. The ceramic housing also helps to reduce the effects of thermal shock, which could otherwise cause the unit to fail prematurely.Overall, the HDM14JT3R60 is an incredibly useful component with many useful applications. It is highly versatile and used in many different industries for regulating current flow. Its ability to precisely control current flow through two wide plates and ceramic housing make it an ideal choice for automotive, aerospace and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description