HF1008-101J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electronic components that are designed to store energy in the form of a magnetic field. They are mainly used to filter signals and to set the frequency tuning band of electronic circuits. The HF1008-101J Fixed Inductor is a general-purpose, high-frequency, non-polarized inductance component. Ithas an inductance value of 1.0 uH, a DCInrush Current of 2A, a rated current of 1A, a DCR of 0.09 Ω, and a Tolerance of +/- 10%. The application fields of the HF1008-101J can be divided into two categories according to its working principle. In the first category, the HF1008-101J can be used in radio frequency (RF) and microwave frequency filtering applications such as matching networks, impedance resonator tanks, or power line noise suppression. In particular, it is suitable for use in high-frequency amplifier output stages, transmitter/receiver (TX/RX) filters, and antenna module tuning circuits.The second category is the use of the HF1008-101J in drift suppression circuits. It is designed to provide a sufficient damping current in a circuit, which can effectively increase the system stability by reducing the frequency drift of a signal. Additionally, due to its low DC resistivity, it can be used in soft switch circuits, in order to reduce the switch on and off times.The working principle of the HF1008-101J is the same as that of other inductors like the film capacitors and ceramic chip capacitors. It works based on the Faraday’s Law of Induction, in which a changing magnetic field creates an induced electric current in a conductor. The HF1008-101J consists of a coil, which is wound around an iron core. When an alternating current passes through the coil, the core creates a magnetic field, which in turn induces a secondary current in the conductor. The induced current is then converted to a voltage, which is used to power the circuit.In conclusion, the HF1008-101J is a general-purpose, high-frequency, non-polarized inductance component with an inductance value of 1.0 µH, a DCR of 0.09 Ω, and a rated current of 1A. It can be used for RF and microwave frequency filtering applications like matching networks, impedance resonator tanks, or power line noise suppression, as well as drift suppression circuits for systems stability. Its working principle is in accordance with the Faraday’s Law of Induction, in which a changing magnetic field creates an induced electric current in a conductor.

The specific data is subject to PDF, and the above content is for reference