HHV2WSJT-73-51K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as HHV2WSJT-73-51K, are widely used in the creation of circuits and are designed to not present an electrical short circuit. They are mainly used as a current or voltage divider, in which electricity is copied ad then distributed over the network based on the resistive value. Generally, current or voltage will run through through-hole resistors in both directions and will "remain static" long enough that energy is dissipated and does not travel through a closed loop.

HHV2WSJT-73-51K is designed to provide resistance, consist of a resistor where the wire runs through the holes in the resistor instead of through a surface as other types of resistors do. It is also referred to as a "diffused type" resistor because the resistive element is created by diffusion. These types of resistors have an advantage of having a large resistive range, because they can be diffused in various sizes. On the other hand, these resistors occupy more space when soldered onto a board.

In addition, the resistors are made of metal oxide material sealed in a ceramic body, providing complete electrical insulation. Thus, this type of resistor will not have any abrupt temperature changes, nor cause any unwanted noise when functioning in an electrical circuit.

When electrical current is passed through HHV2WSJT-73-51K, the resistance is proportional to the size, as well as to the physical dimensions of the resistor. The amount of voltage or current that can be passed through the resistor is directly determined by its resistance. As the size of the resistor is increased, the resistance is increased, and as the size is decreased, the resistance is decreased. The size and shape of the resistor are chosen based on the amount of current or voltage that will be passed through, and this is determined by the resistor’s resistance.

Therefore, through-hole resistors are commonly used to limit the current or voltage of the circuit. By increasing or decreasing the resistance, it can be used to determine an ideal current or voltage that can be used to power the device or circuit in an efficient and safe manner. Furthermore, these resistors can be used for noise reduction in large circuits, as a current or voltage divider, and also act as a protection measure for the overall circuit.

Finally, these types of resistors have an end termination. This allows circuits to be connected to other parts, such as transistors, integrated circuit components, and other components. The resistors are held in place by soldering one end to the board, and the other end to the part which will be connected. As a result, HHV2WSJT-73-51K is suitable for use in the dense and high frequency circuits, owing to its reduced size and fast response time.

The specific data is subject to PDF, and the above content is for reference