HIP-2H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HIP-2H is a bifurcated dynamic shortening system used for static load and anchor destruction applications. This system was developed by Lightning Bolt & Supply, Inc., a provider of an array of structural anchoring solutions. Their HIP-2H system has been successfully used in a wide variety of projects, including seismic retrofit, supporting gravity walls, and stabilizing under-grade infrastructure such as bridge columns.

The principle of operation is based on accumulated tension gear, which is a mechanism that allows for the linear movement of a rod between two collars along a defined path. The rod is made up of two interlocking parts, with the upper part connected to the lower part via a thread. The thread produces a force, which when combined with the compression of the two surfaces of the collar, generates a high tension point on the rod, causing it to be shortened in a controlled manner.

When the HIP-2H system is applied, the rods are inserted into the collars and then tightened until they reach the desired tension. The tension is controlled using a hydraulic cylinder to adjust the pressure, which is then managed by the use of a tension monitor. When the desired tension is reached, the rods are cut off, releasing the stored tension.

The HIP-2H system has been proven to be an effective tool for static load and anchor destruction applications. The system is relatively quick and easy to install, and it does not require extensive maintenance after installation. Furthermore, the system is safe to use in any type of environment, as it does not produce any hazardous fumes or noise. Additionally, the HIP-2H system is a cost-effective option when compared to traditional demolition methods.

The versatility of the HIP-2H system makes it an ideal choice for a wide range of projects. From pre-stressing of concrete structures to removing large concrete walls or columns solidly embedded in the ground, the HIP-2H system is capable of meeting the demands of the most challenging projects. Additionally, the system has also been used for pre-casting operations, which involve the installation of pre-cast concrete structures in preparation for subsequent construction operations.

In summary, the HIP-2H system is a reliable and cost-effective solution for static load and anchor destruction applications. The system is easy to install and maintain, and it can be used in any environment regardless of noise or hazardous emission levels. Additionally, HIP-2H can be used for a wide range of other applications, including pre-stressing of concrete structures and pre-casting of concrete structures. As such, the system is an invaluable tool for a variety of construction and demolition operations.

The specific data is subject to PDF, and the above content is for reference