HJ2-AC120V-6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays are circuits that are used to control a variety of electrical appliances. The HJ2-AC120V-6 is a type of power relay that is rated for current draw of up to 6 amps. It is commonly used for controlling the operation of electric motors, solenoids, valves, and lights.

This type of relay is a single-pole, double-throw (SPDT) type. It has three internal connections, two for the load, and one for the control. The relay can be wired in either an open circuit or closed circuit configuration. In the open circuit configuration, the relay is switched on when the control voltage is applied, and off when the control voltage is removed. In the closed circuit configuration, the relay is switched on when the control voltage is removed, and off when the control voltage is applied.

The HJ2-AC120V-6 relay is designed with built-in reverse voltage protection. This feature protects the relay from damage in case of a reversed voltage connection. The relay can also be ordered with optional plastic dust covers to help protect the contacts from dust and debris.

The HJ2-AC120V-6 is widely used in industrial, commercial, and residential applications. In a residential setting, it can be used to control the operation of a furnace, water heater, air conditioner, or refrigerator. In industrial settings, it can be used to control the operation of motors, valves, pumps, and lighting.

The HJ2-AC120V-6 is relatively easy to install and operate. When wiring the relay, it is important to pay attention to the polarity of the control voltage. Failure to do this correctly could cause the relay to operate in an undesired manner. It is also important to pay attention to the amperage rating of the relay. Connecting a device with a higher current rating can damage the relay.

In order to fully understand the working principle of the HJ2-AC120V-6, it is important to understand the basic principles of an electromechanical relay. An electromechanical relay works by using an electromagnet to open or close an internal switch. When current is applied to the coil of the relay, the magnetic field created by the coil causes the internal switch to close and the device to be powered on. When the current is removed, the electromagnetic field collapses, and the internal switch opens, turning the device off.

The HJ2-AC120V-6 is a reliable and efficient power relay that is used in a variety of applications. It is suitable for controlling a range of electrical appliances from motors to lights. It is important to pay attention to the polarity of the control voltage, and to ensure that the device is connected to a device with a current rating lower than the relay\'s amperage rating to avoid any damage.

The specific data is subject to PDF, and the above content is for reference