HK06032N2S-T Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components that store energy in the form of a magnetic field. In the case of the HK06032N2S-T, an inductor is installed on a printed circuit board (PCB) with an encased structure. Fixed inductors are used in a range of electronics circuits to filter, regulate, and store electrical energy in the form of a magnetic field.

The construction of fixed inductors starts with a conductive wire. The wire is usually copper, aluminum, or a combination of the two. The core material of most fixed inductors is also made of a ferromagnetic material such as iron. The core material can be in the form of a coil, a loop, a wire mesh, or a series of folded or intertwined wires. The core and wire are then encased in a shielding material such as Iron-based soft magnetic powder. In the case of the HK06032N2S-T, this encasing is a metal encapsulated plastic housing.

The HK06032N2S-T is a type of axial-type surface mount ceramic core power inductor. This type of inductor has a range of applications such as providing AC filters, DC filters, VCCS, current sense and EMI filtering. The power inductor core is mainly responsible for providing the magnetic flux. The inductor is supplied in an encased package in order to provide electrical and mechanical protection.

The HK06032N2S-T has a working principle where an alternating current is passed through the inductor, the applied alternating current creates a fluctuating magnetic field. This electric field generates an induced current, which is directly proportional to the rate of change of the alternating current. This induced current is known as a lagging current, meaning that it lags behind the direct current. The magnetic field stores energy which is equal to the energy in the direct current. The energy stored in the magnetic field slowly dissipates over time. The amount of energy stored is proportional to the value of the inductor, which is measured in Volt (V) and Henry (H).

The HK06032N2S-T is an inductor specifically designed for use in power supplies, DC-DC converters, switching supplies, and other similar high-power, switching applications. Furthermore, this inductor also features a 15A rating and up to a 4,000 mΩ maximum inductance at 100 kHz. The device also has a low DCR and an energy-storage capacity that is perfect for high-performance power circuits. The device is also ideal for use when the voltage must be maintained at a constant level, such as in pre-regulation, post-regulation, and peak current-limiting applications for low voltage DC systems.

The HK06032N2S-T performs in a wide range of operations including filtering, regulating, and storing electrical energy in the form of a magnetic field. It is ideal for components such as AC filters, DC filters, VCCS, current sense, and EMI filters. The HK06032N2S-T is designed for high power, switching applications such as power supplies, DC-DC converters, and switching supplies. It is also perfect for use when voltage must be maintained at a constant level, such as in pre-regulation, post-regulation, and peak current-limiting applications.

In summary, the HK06032N2S-T is a fixed inductor designed for use in a range of power electronics applications. It is constructed from a conductive wire with a ferromagnetic core which is then encased in a shielding material. The device has a 15A rating and up to a 4,000 mΩ maximum inductance at 100 kHz, as well as a low DCR and high energy-storage capacity. The device is ideal for components such as AC filters, DC filters, VCCS, current sense, and EMI filters for pre-regulation, post-regulation, and peak current-limiting applications.

The specific data is subject to PDF, and the above content is for reference