HL2-HTM-AC48V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays refer to the relays that can be used to transfer and control various power signals, and the HL2-HTM-AC48V is a power relay within the Over 2 Amps rating.

The overall outlook of the power relay is square-shaped with two screw holes at the back suitable for secure mounting. It has a bezel with a red LED alert light to give visual feedback when the contact is energized. The high copper-nickel-plated silver alloy contacts are suitable for use in various applications where long service life is preferred. Its contact is rated at 250 VAC 8A. It has 48VAC coil power which allows it to control a wide range of external loads such as transformers, solenoids, motors, etc.

The HL2-HTM-AC48V comes with a built-in diode to protect the relay from over current and surge, ensuring that the contacts are not damaged under conditions of high current. It is capable of managing switching frequencies up to 240 cycles/minute and can be used in most applications. It is UL approved and CE certified for safety assurance. Other features include the socket which allows for ease of access to the relay coil allowing for ease of wiring during installation.

The two-pole double-throw design of the relay is suitable for switching between two different load outputs. This makes it suitable for applications such as motors, pumps, HVAC systems, and lighting and security systems. It can be used as an overload device for protection against short circuits, surges, and other current fluctuations. Its operation is based on the energizing and de-energizing of the coil by providing 48VAC voltage.

When the voltage is supplied to the coil, the bezel LED lights up to indicate contact energization and the contact is activated. The relay is now in its conductive state and power can be supplied to the load connected to it. When the voltage to the coil is removed, the red LED turns off, indicating that the contact is de-energized and no current is passed through the load. The relay is now in its non-conductive state and the load has been disconnected.

The HL2-HTM-AC48V power relay is suitable for many industrial control applications such as controlling power to lights, motors, relays, and other equipment. It is a cost-effective and reliable device for controlling and protecting heavier equipment. It is designed to meet the safety requirements of UL and CE standards and is suitable for long-term use.

The specific data is subject to PDF, and the above content is for reference