HLEM16S-1RLF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FFC and FPC connectors are an integral part of any electrical system. They provide a connection between two components while simultaneously protecting them from current or environmental hazards. FFC connectors are especially beneficial in applications that require extreme flexibility, miniaturization or a robust interconnection. The HLEM-16S-1RLF FFC Connector is designed for medical, telecommunications and notebook applications.

The HLEM-16S-1RLF connector consists of two parts: a housing and terminal. The housing consists of the upper and lower housings that together form a protective shell around the terminals. The terminal is a small, metal device that is installed inside the housing and connects the contacts of the cable or other device. The terminal is usually located near the rear end of the connector, near the edge of the housing. The HLEM-16S-1RLF FFC Connector has a mating cycle of 500 and a current rating of 3.0A.

The HLEM-16S-1RLF FFC Connector is designed for medical, telecommunications and notebook applications. It offers a slim design and miniaturization for better utilization of space in tight spaces. The connector has an air gap of 0.17mm and a contact pitch of 0.5mm. This ensures a reliable and low-impedance connection for high-frequency applications. The terminals are securely held in place by a secure snap-fit design, and the connector has an elastomeric pad that keeps the connection clean and free from corrosion or dirt.

The HLEM-16S-1RLF connector is designed for both commercial and military applications. It has proven to be a reliable and stable connector for use in a wide variety of demanding environments. Its robust design and high performance make it suitable for medical, telecommunications and notebook applications, as well as other applications that require high frequency signals and reliable connections.

The design of the HLEM-16S-1RLF connector is simple and dependable. It consists of two plastic housings that are hinged in the middle. The connector is easily mounted on the top or bottom of the board with screws or standoffs, and the design ensures that the terminals are firmly held in place. The terminals are soldered to the board for enhanced performance, but the connector can also be unsoldered and used in a plug-and-play manner.

The HLEM-16S-1RLF FFC Connector is a reliable and durable solution for commercial and military applications that require high flexibility, miniaturization, and low profile. The connector is simple to install and has a low contact resistance. The design also ensures high protection from environmental factors and current hazards. This makes it a viable option for a multitude of vital applications where failure is not an option.

The specific data is subject to PDF, and the above content is for reference