HM1030810000G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Wire to Board is a specialty type of electrical connector designed for the secure connection of two wires or electrical strands. HM1030810000G terminals offer a wide range of connection options, depending on the type of connection required for the application. The most common types of terminal blocks are Screw, Spring and PCB.

Screw Type Terminal Blocks

Screw type terminal blocks allow for a secure connection between the two wires by tightening screws on the terminal. The screw type terminal is by far the most popular type of terminal block, and comes in a variety of configurations and sizes. The HM1030810000G terminal block is a four-position 30.22mm pitch screw terminal block.

These terminals feature a unique flat position angle for easier cable insertion compared to traditional right angle terminal blocks. The terminals feature an integrated auto-locking nut for easier installation, and the mating wire is secured by a M3.5 screw. The maximum current rating is 10A, and the maximum voltage rating is 250V.

Spring Type Terminal Blocks

Spring type terminal blocks offer a low-cost and effortless connection option for connecting two wires. The spring terminals feature a spring clip which pushes the corresponding wire into a special slot in the terminal. The HM1030810000G is a four pole 30.22mm pitch spring terminal block.

The terminals come with a flat profile which facilitates cable insertion, and feature a contact upturn that improves mating forces, prevents accidental contact separation and reduces signal degradation. The maximum current rating is 7A, and the maximum voltage rating is 250V.

PCB Type Terminal Blocks

PCB type terminal blocks offer a secure connection between two wires or cables, and are commonly used as an interface between a cable and printed circuit board (PCB). The HM1030810000G terminal is a four pole 30.22mm pitch PCB terminal block.

The terminals come with an integrated shorting block between the poles to enable the use of two-pole connectors. The contact upturn improves mating forces, and the terminals are available with a straight or angled profile. The maximum current rating is 10A, and the maximum voltage rating is 250V.

Applications and Working Principle

Terminal blocks are used in a variety of applications in the industrial and consumer electronics industries. The most common applications include communications equipment, industrial machinery, wiring harnesses, and lighting. The HM1030810000G terminal block is suitable for a wide variety of applications, including automotive, LED lighting, and consumer electronics.

The working principle of terminal blocks is fairly simple. The terminal block has two parts: the base and the connector. The base has two parts: the terminal and the insulation. The connector has two parts: the clamping arm and the pin. The terminal is connected to the power source, while the clamping arm is connected to the load. The pin is used to make the connection between the terminal and the clamping arm. When the pin is inserted into the terminal and the clamping arm, the connection is secure.

In conclusion, the HM1030810000G terminal block is a versatile and reliable connection option for a wide range of applications. It is available in three different types: Screw, Spring and PCB. The terminals come with an integrated auto-locking nut and a unique flat position angle for easier cable insertion. The terminals are rated for up to 10A and 250V. With its wide range of applications and simple working principle, the HM1030810000G is an ideal solution for connecting two wires or electrical strands.

The specific data is subject to PDF, and the above content is for reference