HM86-10070LFTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes, also known as CM Chokes or CMCs, are a type of electrical component used to suppress high frequency interference in a circuit. They are commonly used in power electronics applications, specifically for power factor correction, over-voltage, under-voltage, and harmonic distortion protection. The HM86-10070LFTR is a common mode choke designed specifically for high frequency power line application. It can be used in a range of power related applications such as LED lighting, motor control, uninterruptible power supplies (UPSs), and switch-mode power supplies (SMPSs).

The HM86-10070LFTR is a two-element common mode choke made of three layers of wire wound on an iron core. It is designed to provide wide band suppression by placing a high frequency noise filter near the source of interference. The device consists of two inductors, each of which can be connected with one or two wires. The wire windings are separated by a layer of insulation material to ensure that the choke is effective against high frequency noise. Each inductor is then connected to the outside nodes of the power line.

The working principle of the HM86-10070LFTR is quite simple. When AC or DC current is applied to the two conductors of the power line, the inductors in the device act as high-pass filters, creating a magnetic field which effectively blocks all the noise signals from entering the power line. By providing a high frequency filter close to the source of the interference, the choke is able to significantly reduce the overall level of noise in the circuit. The inductors also act as a current limiter, as they are only able to pass through a certain amount of current, which greatly reduces the chances of over-currents or shorts.

The HM86-10070LFTR is a cost-effective solution for suppressing high frequency interference in industrial, medical, and home applications. It is designed to be used with two types of connectors – one type Powers-T connectors and the other type of connector-M connectors. The HM86-10070LFTR can also be used with power supplies, SMPSs, and other power related applications. It provides a high-performance solution for reducing common-mode interference in AC and DC systems. By providing effective protection against high frequency interference, the HM86-10070LFTR can ensure that the power circuits remain interference-free.

The specific data is subject to PDF, and the above content is for reference