Allicdata Part #: | 1127-2733-ND |
Manufacturer Part#: |
HMC-APH596-SX |
Price: | $ 81.21 |
Product Category: | RF/IF and RFID |
Manufacturer: | Analog Devices Inc. |
Short Description: | IC RF AMP DIE |
More Detail: | RF Amplifier IC VSAT, DBS 16GHz ~ 33GHz Die |
DataSheet: | HMC-APH596-SX Datasheet/PDF |
Quantity: | 2 |
2 +: | $ 73.82620 |
Series: | -- |
Packaging: | Tray |
Part Status: | Active |
Frequency: | 16GHz ~ 33GHz |
P1dB: | 24dBm |
Gain: | 17dB |
Noise Figure: | -- |
RF Type: | VSAT, DBS |
Voltage - Supply: | 5V |
Current - Supply: | 400mA |
Test Frequency: | 16GHz ~ 33GHz |
Package / Case: | Die |
Supplier Device Package: | Die |
Base Part Number: | HMC |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Radio frequency (RF) amplifiers are components that are used to increase the power of a signal, usually in the form of communication signals. The RF amplifier is an extremely important component for the transfer of information in communication applications. A good RF amplifier should have low noise, high gain, wideband characteristics, and low power consumption. HMC-APH596-SX is one of the new RF amplifier chips developed by Hittite Microwave Corporation. This part can provide a voltage gain of 5 to 6 dB when given a DC supply of 3-15 Volts.
HMC-APH596-SX is rated at 400MHz-6GHz and has an output P1dB of 22-25dBm. With the high gain and output power, this part can be used in numerous RF applications, such as cellular basestations, VSAT, WiFi/WIMAX, wireless backhaul links, and remote monitoring systems. The chip also has a low current dissipation of only 135mA, making it an energy-efficient amplifier.
The design of this amplifier consists of two transistors and a negative resistance feedback network. Input and output matching networks are connected to the transistors. The transistor acts as an active device to increase the gain of the signal while the negative resistance feedback network controls the stability of the amplifier. The two transistors are biased with a DC power supply and the output of the amplifier is connected to the output matching network.
The two quasi-fourth-order curves of the bandwidth are about 75MHz and 500MHz. This indicates that the HMC-APH596-SX has a wide-range frequency response, making it suitable for many types of applications. The noise figure is measured at 7dB, which is quite low for a RF amplifier. The linearity of the device is also good, with harmonics below -50dBc at 1dB compression.
The HMC-APH596-SX is an ideal choice for a wide range of RF applications. Its low power consumption and high gain make it suitable for lower power consumption applications. The wideband characteristics mean that this amplifier can be used in many different types of applications, from frequency hopping to broadband. In conclusion, the HMC-APH596-SX is an excellent RF amplifier that is suitable for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...