HMC-C582 Allicdata Electronics
Allicdata Part #:

1127-3337-ND

Manufacturer Part#:

HMC-C582

Price: $ 2.08
Product Category:

RF/IF and RFID

Manufacturer: Analog Devices Inc.
Short Description: DISTRIBUTED AMPLIFIER
More Detail: RF Amplifier IC VSAT 10MHz ~ 20GHz Module
DataSheet: HMC-C582 datasheetHMC-C582 Datasheet/PDF
Quantity: 9
1 +: $ 1.89000
Stock 9Can Ship Immediately
$ 2.08
Specifications
Series: --
Packaging: Bulk 
Part Status: Active
Frequency: 10MHz ~ 20GHz
P1dB: 26dBm
Gain: 24dB
Noise Figure: 6.5dB
RF Type: VSAT
Voltage - Supply: 15V
Current - Supply: 690mA
Test Frequency: 20GHz
Package / Case: Module
Supplier Device Package: Module
Base Part Number: HMC
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Amplifiers refer to electronic amplifiers which are used to strengthen a weak radio signal. The HMC-C582 is a Gallium Arsenide (GaAs) monolithic microwave integrated circuit (MMIC) 4-stage amplifier chip, which is designed to address the amplification requirements of short-range radar systems. The device operates at frequencies from 5GHz to 8GHz, and requires a bias voltage of 5V DC. The noise figure (NF) of the HMC-C582 is 3.5dB, and the gain flatness is 2.2dB, making it an ideal amplifier chip for short-range radar systems.

Operating Principle

The HMC-C582 operates on the principle of amplification of the input signal in each stage to produce the desired output power. Each stage consists of an input terminal and an output terminal, with the input signal being amplified by an active component such as a transistor or an integrated circuit. The amplified signal is then passed through a set of coupled inductors and capacitors for impedance matching. The last stage of amplification is the output stage, which provides the desired level of gain. The transistor used in the output stage is designed to be able to handle the power levels required for the output signal.

Application Field

The HMC-C582 is primarily used in short-range radar systems. The amplification capability of the device is ideal for inexpensive low-power radar systems such as automotive sensors, driver safety aids, and surveillance equipment. The device is also suitable for use in military applications such as radar countermeasures and missile guidance systems.

The HMC-C582 is also being used in mobile communication networks for large-scale distributed antenna systems (DAS). In this application, the device is used to amplify the signal from the base transceiver station in order to extend the range of the network. In addition, the device is also used in satellite communication systems and digital video broadcasting (DVB) systems.

Conclusion

In conclusion, the HMC-C582 is a high-performance RF amplifier chip with excellent gain flatness and noise figure. It is suitable for a wide range of applications in short-range radar systems, mobile communication systems, and satellite communication systems.

The specific data is subject to PDF, and the above content is for reference

Latest Products
HMC667LP2

IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...

HMC667LP2 Allicdata Electronics
TQM7M9023H

MODULE GSMRF Amplifier IC CDMA, GSM, EDG...

TQM7M9023H Allicdata Electronics
HMC406MS8GTR

IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...

HMC406MS8GTR Allicdata Electronics
ALM-GP003-BLKG

MOD LNA GPS FRONT END 9MCOBRF Amplifier ...

ALM-GP003-BLKG Allicdata Electronics
PTMA210452EL V1 R250

IC AMP RF LDMOS 45W H33265-8RF Amplifier...

PTMA210452EL V1 R250 Allicdata Electronics
MGA-30116-BLKG

IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...

MGA-30116-BLKG Allicdata Electronics