HMC231G7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF switches are electronic components that can be used to connect and disconnect electrical circuits and channels. They are widely used in many applications, such as telecommunications, test and measurement instruments, medical devices and military systems. One type of RF switch is the HMC231G7 from Avago Technologies. This article will discuss the application field of HMC231G7 and its working principle.

Application Field

The HMC231G7 from Avago Technologies is a single-pole, four-throw (SP4T) absorptive switch with an insertion loss of 1.4 dB and an isolation of 60 dB. This switch comes with a built-in DC block and switch controller, making it an ideal solution for many applications. It is suited for use in radio frequency (RF) and microwave automatic test equipment, radio communications, medical imaging systems, satellite ground station systems and wireless base station systems.

This RF switch offers high power handling and can handle up to 3 W of power. It also provides excellent linearity and low harmonic distortion across a wide frequency range of DC to 6 GHz. The HMC231G7 is designed to operate over a wide temperature range of -40 to +85 °C, making it suitable for use in harsh environmental conditions.

Working Principle

The HMC231G7 is an SP4T absorptive switch, which means that it uses a single switch, or pole, with four ports, or throws. It is absorptive because the circuits are opened by absorbing the signal rather than reflecting it. The switch comprises two sections: a PIN diode-based matrix array and an integrated controller. The PIN diode matrix array is used to route signals between the ports while the integrated controller manages the routing. The integrated controller can be programmed using an I2C serial digital interface. It also features a wide range of control options and allows the user to select the desired logic pattern.

The HMC231G7 switch uses TTL logic levels to control the switch state. When a high-logic signal is applied to one of the throw lines, the PIN diode matrix array allows the signal to be absorbed and routed between the ports while blocking other signals. The switch also features bypass mode, which allows signals to be routed between the ports regardless of the switch state. This is useful for testing and calibration purposes.

The HMC231G7 RF switch offers excellent performance, with low power consumption and high reliability. It is suitable for use in a wide range of applications, ranging from radio communications to satellite ground station systems. Its wide range of features makes it an excellent choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference