HMC284AMS8GETR RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Switches are important for the ability to test products easier and faster. The HMC284AMS8GETR is a multi-function Low Noise 2.4-2.5GHz RF Switch. This product has multiple applications and can be used for both commercial and military applications.

The HMC284AMS8GETR is a low noise, high linearity, highly integrated pin compatible RF switch. It offers single pole, single throw (SPST) and single pole, double throw (SPDT) configurations. The product supports single-ended and differential operation and is rated to operate at frequencies of 2.4GHz – 2.5GHz.

The device has an on/off current of 55 mA and an off isolation of 35 dB at 2.4GHz. It also offers low insertion loss of 0.175 dB / 0.20 dB and high isolation of 40 dB / 38 dB up to 2.5GHz. The product has an integrated 1 Volt AM voltage monitor, which provides information on the status of the switch. It can be set up in either an open-drain or push-pull configuration.

The HMC284AMS8GETR can be used for broadband switching applications such as aerial mimo systems. It is also used in base station receivers, discrimination circuits, and small cell radios for high speed switching. This product offers a high degree of integration with low power consumption and can be used in a variety of applications including wireless test equipment, consumer electronics, cellular infrastructure, medical instruments, and avionics systems.

The working principle of the HMC284AMS8GETR is based on the switching of an RF signal between two ports. The device has an internal voltage regulator and two single-pole, double-throw switches that are controlled by the "ON/OFF" signal. When the voltage regulator is ON, it drives the switch, and the signal passes from one port to another. When the voltage regulator is OFF, the signal passes through the switch in the opposite direction and the signal is stopped from passing.

The HMC284AMS8GETR has a wide range of applications due to its low-noise, high linearity, and high integration. It is typically used for broadband switching applications such as aerial multi-channel mimo systems and base station receivers. It is also used in discrimination circuits and small cell radios for high speed switching. It can be used in a variety of consumer electronics, cellular infrastructure, medical instruments, and avionics systems.

The specific data is subject to PDF, and the above content is for reference