HMC518

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HMC518 is a gallium arsenide (GaAs), monolithic double-balanced mixer or downconverter produced by Hittite Microwave Corporation. This device is an ideally suited component for RF applications where it is required to have low conversion loss in a single package. The typical frequency range of its operation can range from 50 MHz to 7 GHz, and in the sizes from 6x6mm, 8x8mm, 14x14mm and 20x20mm packages, this high performance mixer easily integrates into existing designs.

The application field of the HMC518 is very wide, as it covers the frequency range from 50 MHz to 7 GHz. It is widely used in the consumer electronic industry, aerospace and defense, wireless communications systems, test instrumentation, etc. The HMC518 can be used in different types of RF amplifier applications such as upconverters, power amplifiers and RF amplifiers. In addition, it is also employed in other applications such as frequency multipliers, local oscillators, signal generators, etc.

The HMC518 is a double-balanced mixer based on a Gilbert cell MOS structure. It has two inputs and two outputs, the Local Oscillator (LO) and Input (RF) and the two outputs are the sum (IF) and difference (IF) of the LO and RF signals. The device has an integrated local oscillator amplifier and bias circuit, which make it capable of operating without any external supporting circuitry. The operating conditions of the device can be adjusted with the help of the integrated bias circuit.

The working principle of this device is based on the balanced mixer operation. The mixing principle of this device is to combine the two input signals, i.e. the local oscillator and RF, to generate the difference signal, which is then amplified and filtered for use by the application. The device has an integrated local oscillator amplifier and bias circuit, which makes it capable of operating without any external supporting circuitry. The signal output can be further amplified by using an on chip amplifier. The signal output is typically filtered using balun or high-pass/low-pass filter designs. This high-performance mixer supports a wide range of applications with its superior performance.

In conclusion, the HMC518 is a highly integrated double-balanced mixer or downconverter that can be used in RF amplifier applications such as up converters, power amplifiers and RF amplifiers, as well as applications such as frequency multipliers, local oscillators and signal generators. It is a versatile component that is suitable for a wide range of applications. Its working principle is based on the balanced mixer operation, which enables it to provide high levels of performance with minimal power consumption.

The specific data is subject to PDF, and the above content is for reference